Wheelchairs are available at airports, hotels, resorts, theme parks, and on cruises, but standard wheelchairs require ongoing effort and can struggle through difficult terrain. Standard wheelchairs are simply less capable than electric ones. WheelMove wants to change that.

WheelMove is a portable wheelchair attachment that turns any standard wheelchair into an electric one, allowing people to travel more easily wherever they are. It debuted at CES 2026, marking a significant leap in accessibility for wheelchair users who travel.

When I found WheelMove at CES “Unveiled,” I thought back to a recent family trip just two weeks ago, where two of my older family members often rented wheelchairs. They don’t use wheelchairs in their day-to-day lives, but walking through a theme park all day wasn’t possible. They needed support navigating the park, and the rest of us gladly took shifts pushing their wheelchairs. With a portable attachment like WheelMove, though, wheelchair users can use less effort and enjoy more independence through the battery-powered, remote-controlled attachment.

Credit: Iyaz Akhtar

Riders simply attach WheelMove to the front of any standard wheelchair, and the device lifts the wheelchair’s smaller front wheels off the ground. Once attached, the rider controls the WheelMove through a basic remote control on their armrest, thigh, or wherever is most comfortable. The attachment weighs under 20 pounds, including its 10-inch wheel, 250W motor, and a battery that goes about 15 miles on a charge. Carrying an additional battery can double its range before needing to recharge, and it can navigate terrains including gravel, grass, and uneven surfaces like cobblestone.

WheelMove is an incredibly innovative assistive technology poised to broaden personal mobility for those who need it, and it’s also one of the finalists for the official Best of CES 2026 awards for the travel category. Pre-orders are available in France where the start-up is based, but the founders plan to expand internationally later this year. It costs about €5,000 or $6,000.

If you’ve never docked a boat before, consider yourself lucky. There are plenty of popular TikTok channels devoted to shaming those who bring their craft back home clumsily or berth them with something less than finesse. Tricky crosswinds, unpredictable surf and even the jeers of passersby can make it a stressful experience at the best of times.

Brunswick, which owns more than 50 water-borne brands like Sea Ray, Bayliner and Mercury Marine, has a solution. It’s demonstrating some self-docking tech called AutoCaptain at CES 2026 that makes this process a cinch, plus a fleet of other innovations that, in some cases, leave some of the smart cars on the show floor looking a bit remedial.

One of those technologies is edge AI. While in-car AI is an increasingly common feature, those agents are exclusively running remotely, relying on cellular connections to offload all the processing power required to drive a large language model.

Sadly, that won’t always work on a boat.

Brunswick

“One of the things about AI for boats is you don’t have connectivity, so there is some edge compute required,” David M. Foulkes told me. He’s chairman and CEO of Brunswick.

Many of the company’s boats do have active cellular connectivity, but head far enough offshore, and you’re on your own unless you’re packing Starlink or the like.

To solve that, Brunswick is running advanced SoCs from NVIDIA and other providers that enable running a limited agent offline — on the edge, as it were. When offline, Misty, as the on-boat AI assistant is called, won’t be able to make dinner reservations or craft a 3,000-word treatise on the history of America’s relationship with Greenland. It can, however, help with navigation or boat settings.

“It’ll help answer the kind of questions that you might need to take out a manual to understand and maybe act as an assistant to make your boating a bit smoother,” Foulkes said.

When the company’s smart boats are connected, they offer some degree of remote control. No, you can’t drive it around the docks and freak out your pier-mates, but you can check on the boat remotely to make sure nobody’s trying to stow away. You can even precondition it to get the cuddy cabin nice and cool before you come aboard.

Power for that, and a variety of other onboard systems, can come from an integrated power system called Fathom, which has a lot in common with modern smart home tech. Solar panels on the roof (nicely disguised beneath a black mesh) collect power to recharge an onboard battery, with various sizes upwards of 30 kWh depending on the boat’s size. That battery can also be recharged by the onboard motors, like the three 425-horsepower V10s the Sea Ray SLX 360 drydocked at the Brunswick booth at CES 2026.

The juice in that battery can then be used to power a variety of onboard systems, even charging a pair of electric hydrofoils, which another of the company’s boats, called the Navan C30, had strapped on the roof.

You’ll also find cameras on the roof of these boats. That’s how the AutoCaptain feature works, numerous fisheye lenses scanning the water in every direction. Approach a pier and the AI assistant asks if you’d like some help docking. Just tap the button on the touchscreen, then kick back and let Misty do the driving.

Between automated docking, the in-cabin AI assistant and the smart power distribution system, Brunswick’s boats offered some impressive tech. But then they’d have to, given the cost. The Sea Ray SLX 360 Outboard has a starting price of $586,000. The smaller Navan C30 is a rather more attainable, but still extreme, at $227,500. That’s still probably cheaper than hiring a real captain, though.

This article originally appeared on Engadget at https://www.engadget.com/transportation/brunswicks-latest-boats-at-ces-2026-feature-edge-ai-self-docking-capabilities-and-solar-power-185500213.html?src=rss

Bose released the Application Programming Interface (API) documentation for its SoundTouch speakers today, putting a silver lining around the impending end-of-life (EoL) of the expensive home theater devices.

In October, Bose announced that its SoundTouch Wi-Fi speakers and soundbars would become dumb speakers on February 18. At the time, Bose said that the speakers would only work if a device was connected via AUX, HDMI, or Bluetooth (which has higher latency than Wi-Fi).

After that date, the speakers would stop receiving security and software updates and lose cloud connectivity and their companion app, the Framingham, Massachusetts-based company said. Without the app, users would no longer be able to integrate the device with music services, such as Spotify, have multiple SoundTouch devices play the same audio simultaneously, or use or edit saved presets.

Read full article

Comments

A startup called ReviMo has developed a robotic system that provides a way for people with limited mobility to lift and transfer themselves — like from a bed to a wheelchair, or to the toilet — without the assistance of a caregiver. ReviMo’s Niko has two sets of arms: one that forms a “scooping seat” that slides underneath the person to lift them up, and the other encircling their torso and providing a backrest. It can be operated both by remote and using the controls on its dashboard. Niko in its current iteration can carry up to 250 pounds, but the team says it’s working on a version that can support up to 400 pounds.

In addition to aiding in transfers, Niko can lift the rider to a standing level and offers retractable handlebars for support. It also has the potential to be a big help to caregivers, who in many cases assist with multiple transfers every day. Even in a situation where a person isn’t able to operate it by themselves, Niko facilitates a transfer that requires much less physical exertion than today’s common methods, like sling-based mechanical lift systems. At CES, founder Aleksandr Malaschenko gave a demonstration of its lifting capabilities, using it to scoop him up from a chair and bring him out into the aisle. 

Niko is designed to work with most wheelchairs and be compact enough to navigate small bathrooms. It can position a person right above a toilet, and there are disposable seat covers. The goal is to help people with limited ability achieve more independence.  

It is the kind of device that, if it delivers on its promises, could be a game-changer for people with limited mobility and paralysis, and their loved ones. My dad was diagnosed with ALS when I was a kid, and I learned how to operate a Hoyer lift by the time I was in middle school. This strikes me as something we would have really appreciated having around. Malaschenko has said the inspiration for the robotic system came from being a caregiver for his grandfather following a stroke. 

Niko is expected to be available before the end of this year. The system will cost about $15,000, though the team said it’s working to get Niko covered by insurance. The company is also offering lower prices for customers who sign up for one of its premium waitlists, and there are options to rent it, for those who would only need a lift and transfer system temporarily. 

This article originally appeared on Engadget at https://www.engadget.com/transportation/niko-is-a-robotic-lift-for-people-with-limited-mobility-that-doesnt-require-a-caregivers-help-184500703.html?src=rss

Several years after Samsung introduced the Frame TV in 2017 — a television designed to display fine art and resemble a framed painting when switched off — competitors are finally catching up in meaningful numbers. Amazon announced the Ember Artline TV at CES 2026 this week, a $899 model that can display one of 2,000 works of art for free and includes an Alexa AI tool to recommend pieces suited to your room. Hisense unveiled its CanvasTV late last year, TCL has the NXTvision model, and LG has announced the Gallery TV for later this year.

The surge in art-focused televisions comes down to two factors: smaller living spaces in cities where younger buyers lack dedicated rooms for large screens, and advances in matte screen technology that enable displays to absorb light like a canvas rather than reflect it like a window. Local dimming and improved backlighting processing allow these newer models to maintain their slim profiles for flush wall-mounting while delivering more realistic art reproduction than earlier edge-lit designs.

Read more of this story at Slashdot.

We may earn a commission from links on this page.

Living in a comfortable, heated house is something a lot of us take for granted. When the cold weather hits, we just put on thick socks, turn up the thermostat (or take other steps), and go about our business. But most modern homes rely on the electrical grid to keep that heat flowing. Even if your home is heated by natural gas or heating oil, there’s most likely an electric component to your heating system.

That means that when the power goes out—say, in the middle of a fierce blizzard—so does your heat. Even recently built homes can lose interior heat pretty quickly, dropping to uncomfortable (and even unsafe) temperatures within a day at most. If you’re not sure when power will be restored, you’ll need to find a way to keep the place as warm as possible if you and your property are going to come out of the experience unscathed. Here are are four ways to keep your house warm if your heat goes out.

Pre-heat your home before a storm

If you have some warning that a power loss is possible during the cold months—a winter storm warning, for example—it’s a good idea to “pre-heat” your home. The warmer your house is when the power goes out, the longer it will remain at a safe and/or comfortable temperature. You don’t necessarily want to make it tropical, but a few degrees higher than usual will buy you some time if the power goes out. Combined with sealing the house as tightly as possible—by hanging thermal curtains or blankets over windows, applying plastic insulation kits to windows, and deploying draft stoppers under doorways and anywhere else cold air is getting in—this strategy can be very effective.

Isolate your family to a single room

Trying to keep a large house warm without an active heating system is a fool’s errand. Instead, focus on a single room where everyone in the house can gather, because a small room is a lot easier to warm up. A few considerations about which room to choose:

• Since heat rises, rooms on upper floors will be warmer than rooms on the main floor.

• A room that gets a lot of sunlight can be warmed during the day by opening up the curtains and letting that solar energy do its thing.

• Smaller rooms will be easier to heat up, but consider how many people will need to live and sleep in there.

• Rooms near bathrooms (or with en-suite baths) offer a bit more convenience, especially if you’re going to be hunkering down for a while.

Once you’ve selected the room you’ll be using, try to keep it closed up as much as possible (covering windows, stopping up drafts, keeping the door closed). Introducing an indoor-safe heater is a good idea if you have one (or you can make one; see below).

If none of the rooms in your house are ideal, you could also consider setting up a tent indoors. Tents are designed to hold in heat, and can create a small, controllable environment that will be easier to keep warm in a pinch.

Make your own DIY heater with candles and clay pots

If you’ve planned ahead and have an indoor-safe propane or kerosene heater (or even a solar-powered portable heater), that will obviously help to keep your home warm (just be certain to follow all the instructions for ventilating whatever space you’re heating up). If you haven’t, or you discover that your propane tanks have leaked and you have no fuel, don’t despair. You can still generate heat by building a candle-pot heater, which is an old-school way of generating some quick heat.

A candle-pot heater is pretty easy to set up: You’ll need 1-3 clay flower pots (or similar ceramic containers) in different sizes, some non-flammable materials to set up on (bricks or stone tiles will work), and some candles. Then arrange everything:

• Set up your bricks or other materials to create a raised platform, with plenty of airflow.

• Place your smallest pot upside down on the bricks and cover the hole in the bottom (if it’s a flowerpot).

• Place the larger pot on top, and then the largest on top of that if you have three pots.

• Place your candles underneath and light them.

The candles don’t produce much heat, but the clay pots will absorb that heat and slowly start to radiate out. Instead of the candles’ heat just rising up to your ceiling and being cooled by the frigid air already in the room, the pots capture it and intensify it.

Will this replace your home’s heating system, or even a portable propane heater? Not by a mile. But it will make a difference, especially in a small space.

A few things to keep in mind here:

• Candles are open flames, so never leave your heater unattended, and always be conscious of fire hazards.

• You can place a foil-covered panel behind the heater to help reflect the heat in a specific direction (say, toward the chair you’re sitting in).

Get a furnace battery backup

If you have a gas furnace, it’s not that hard to keep it running even during a blackout if you have an alternative power source like a generator or even a power bank. The furnace needs electricity to run the ignition, the blower, and communication between the thermostat and the furnace or boiler. A decent generator or robust battery can definitely keep your furnace running for a while—and those extra hours or days could be crucial in an extended cold-weather blackout.

If you can see an obvious on/off switch on your furnace, you can pretty easily install a transfer switch like this one (here’s a video demonstrating how it’s done). This allows you to plug in a generator or power bank and keep your furnace running even when the power’s out—all you have to do is plug it in and flip the switch. If you’re not entirely comfortable with electrical wiring, you can hire a licensed electrician to install it as well, of course. Once it’s done, you’ll never have to worry about a cold house again—as long as you pair the switch with a generator or battery solution of sufficient power to keep things running.

Ubisoft is closing a Canadian studio just over two weeks after it unionized. In a dizzying claim, the company told GamesIndustry.biz that the closure of Ubisoft Halifax was part of “company-wide actions to streamline operations” and unrelated to the unionization.

On December 22, Ubisoft Halifax announced that 61 of its workers had joined the Game & Media Workers Guild of Canada. At the time, the studio’s lead programmer, Jon Huffman, told CTV News that 73.8 percent of employees voted in favor of unionizing. Ominously in hindsight, he had described the decision as a “huge relief.” The studio was working on mobile titles within the Rainbow Six and Assassin’s Creed franchises.

Ubisoft’s official statement framed the shutdown as part of a broader pattern of financial belt-tightening. “Over the past 24 months, Ubisoft has undertaken company-wide actions to streamline operations, improve efficiency, and reduce costs,” the company said. “As part of this, Ubisoft has made the difficult decision to close its Halifax studio. 71 positions will be affected. We are committed to supporting all impacted team members during this transition with resources, including comprehensive severance packages and additional career assistance.”

In October, Ubisoft announced that Massive Entertainment, developer of The Division series, Star Wars Outlaws and Avatar: Frontiers of Pandora, was offering buyouts to some employees. The company framed that move as a “voluntary career transition program.” Over the past few years, Ubisoft has closed offices and laid off workers in San Francisco, London and Leamington. In 2024, the company’s headcount dropped by eight percent.

This article originally appeared on Engadget at https://www.engadget.com/gaming/ubisoft-is-shutting-down-a-studio-16-days-after-it-unionized-183000983.html?src=rss

When LG announced that it would demo a laundry-folding, chore-doing robot at CES 2026, I was immediately intrigued. For years, I’ve wandered the Las Vegas Convention Center halls and wondered when someone might create a robot that can tackle the mundane but useful tasks I despise like folding laundry. With CLOiD (pronounced like “Floyd”), LG has proven that this is theoretically possible, but probably not likely to happen any time soon. 

I went to the company’s CES booth to watch its demonstration of CLOiD’s abilities, which also include serving food, fetching objects and fitness coaching. During a very carefully choreographed 15-minute presentation, I watched CLOiD grab a carton of milk out of the fridge, put a croissant in an oven, sort and fold some laundry and grab a set of keys off a couch and hand them to the human presenter.

Throughout the demonstration, LG showed off how its own appliances can play along with the robot. When it rolled over to the fridge, the door automatically opened, as did the oven. When the LG-branded robot vacuum needed to move around a hamper, CLOiD helpfully cleared the path. But the robot also moved very slowly, which you can see in the highlight video below. 

The appliance maker is selling the setup as a part of its vision for a “zero labor home” where its appliances and, I guess, robotics technology can come together to take care of all your chores and household upkeep. Maybe I’m jaded from a decade of watching CES vaporware, but I left the slick demo thinking the concept is unlikely to amount to much anytime soon.

On one hand, it is exciting to see robots competently performing tasks that would actually be useful to most people. But this technology is still far from accessible. Even LG isn’t making any firm commitments about CLOiD’s future as anything more than a CES demo. The company has instead said that CLOiD is a signal of its interest in creating “home robots with practical functions” and “robotized appliances,” like fridges with doors that can open automatically. 

That may be a more reasonable target for the company (and yet another way for LG to sell us more appliance upgrades). But it’s still pretty far from anything approaching the fantasy of a “zero labor home.”

This article originally appeared on Engadget at https://www.engadget.com/home/smart-home/lgs-cloid-robot-can-fold-laundry-and-serve-food-very-slowly-181902306.html?src=rss

If you’re a Mac user with Logitech accessories and you’ve noticed that your settings and customizations seem to have gone away this week, you’re not alone.

The company’s Logi Options+ and G Hub apps for macOS abruptly stopped functioning on Monday, refusing to launch and reverting all accessories’ settings to their built-in defaults.

The culprit, according to both a Logitech support page and Reddit posts from Logitech Head of Global Marketing Joe Santucci, was a security certificate that was inadvertently allowed to expire, rendering both apps non-functional.

Read full article

Comments

Climate-heating emissions from aviation could be slashed in half — without reducing passenger journeys — by getting rid of premium seats, ensuring flights are near full and using the most efficient aircraft, according to analysis. The Guardian: These efficiency measures could be far more effective in tackling the fast-growing carbon footprint of flying than pledges to use “sustainable” fuels or controversial carbon offsets, the researchers said. They believe their study, which analysed more than 27m commercial flights out of approximately 35m in 2023, is the first to assess the variation in operational efficiency of flights across the globe. The study, led by Prof Stefan Gossling at Sweden’s Linnaeus University, examined flights between 26,000 city pairs carrying 3.5 billion passengers across 6.8 trillion kilometers. First and business class passengers are responsible for more than three times the emissions of economy travelers, and up to 13 times more in the most spacious premium cabins.

The average seat occupancy across all flights in 2023 was almost 80%. US airports accounted for a quarter of all aviation emissions and ran 14% more polluting than the global average. Atlanta and New York ranked among the least efficient airports overall, nearly 50% worse than top performers like Abu Dhabi and Madrid.

Read more of this story at Slashdot.

At CES 2026, Swedish furniture giant Ikea showed off its new Kallsup Bluetooth speaker, which will cost just $10 in the U.S. Normally, I’d be skeptical of any speaker this cheap, but the Kallsup grabbed my attention for a few reasons—chief among them that Ikea says you can chain up to 100 of them together to create the multi-speaker setup of your dreams. That aside, the hardware seems pretty basic: The speaker has a USB-C port at the back, and two buttons up top (play/pause, and pair).

Chaining together Bluetooth speakers is nothing new, but this is the first time I’m seeing the ability to pair as many as 100 of them. The only reason this use case is even remotely plausible is the pricing: As reported by The Verge, the Kallsup Bluetooth speaker will be priced at $10 in the U.S. and €5 (roughly $6) in Europe, which means you can buy 10 of them for the same price as one HomePod mini. The Verge also says that once you pair one of them to your phone (the company promises Bluetooth 5.3 support), you can add more to the chain with a two-button sequence.

Design-wise, the speakers are cubical and colorful, which I’m a fan of (at the moment, Ikea is showing them off in white, green, and pink). But how do they sound? Well, Gizmodo says that while they are loud, they don’t deliver much in the way of bass. I’d love to get a couple to judge for myself before committing to chaining a few dozen of them together, but I definitely admire Ikea’s big swing here. That said, while CES is the place to grab attention with out-there ideas, and I am struggling to find a use case for chaining 100 Bluetooth speakers together. Maybe if you’re an amusement park owner and you want the cheapest possible audio setup for a haunted house? Likely most people will be content with a more reasonable number of them, spread around the house.

I’ll admit that I’ve always kind of taken walking for granted. Other than a knee injury more than a decade ago, my ability to walk long distances has largely been limited only by my own choices. That’s not the case for everyone, though. And robotics company Dephy has created a pair of robotic sneakers, called the Sidekick, that are meant to help people who want to walk more than their bodies might otherwise be capable of.

The system consists of two parts: an ankle-worn exoskeleton and a special pair of sneakers that attach to it. The exoskeleton hooks onto the back of the shoe and is secured with a strap around your calf. The battery powered device is equipped with sensors that can detect and adapt to the wearer’s gait in order to deliver an extra “boost” with each step. 

The whole setup is pricey, at $4,500, but Dephy is betting that people who have “personal range anxiety” might be willing to pay for the extra confidence the Sidekick can provide. “This is a device that’s kind of like [having] an extra calf muscle,” Dephy CEO Luke Mooney told me. 

Karissa Bell for Engadget

I was able to take the Sidekick for a spin around the CES showfloor and it was a truly surprising sensation. The best way I can describe walking with the Sidekick powered on is that with every step forward there’s a noticeable upward push from under your heel. It wasn’t enough to throw me off balance, but it did feel a bit strange.

The Sidekick has adjustable power levels based on how much help you might need. At the highest level, it definitely felt unnecessarily pushy. The lower levels were still noticeable but felt less disruptive. I just felt… bouncy. Later, when Mooney turned off the power entirely, I noticed that my feet felt weirdly heavy in a way they hadn’t just a few minutes before. 

Mooney was quick to tell me that I’m not Dephy’s target demographic. “A lot of times people who are fit, or like athletes, actually struggle to adopt to the technology because their body’s so in tune with how they move,” he said. “Whereas folks who are not as physically active and fit, their body’s ready to accept help.”

The company’s technology will be used in products more focused on athletic performance, however. Dephy has partnered with Nike on its upcoming robotic sneaker currently known as Project Amplify. Mooney declined to share details on the collaboration, but the shoemaker has claimed that some early testers have been able to improve their mile times by two minutes. 

I tried the Sidekick early in the day. Several hours later, though, when I was walking between the Las Vegas Conventions Center halls for the third or fourth time, I started thinking about those robotic sneakers again. I was getting close to 10,000 steps and hadn’t sat down for hours. My feet were sore. I remembered that strange, bouncy boost and thought it sounded kind of nice.

This article originally appeared on Engadget at https://www.engadget.com/wearables/these-robotic-sneakers-gave-me-a-surprising-boost-at-ces-174500005.html?src=rss

Spotify is rolling out more social features to keep people on the platform. It’s adding a new tool to its messaging platform that lets users see what their friends and family members are listening to in real time.

Once activated, a user’s listening activity will be displayed at the top of the chat. The other person in the chat can tap the bar to play a particular track, save it or react with an emoji. People can also, of course, comment directly to either praise or rag on the song selection.

There’s another little addition to Spotify’s messaging system. Users will now be able to invite chat participants to start a Jam, which is the app’s collaborative listening feature. Premium users will find a “Jam” button in the top right corner, which sends an invite. This lets two people add tracks to a shared queue and listen together. Free users can join one of these sessions, but cannot initiate.

It’s worth noting that the messaging platform is currently just a one-on-one affair. There’s no option for a group chat, so users won’t be able to spy on multiple people simultaneously. These tools are rolling out gradually for iOS and Android right now, but won’t be broadly available for a few weeks.

This article originally appeared on Engadget at https://www.engadget.com/entertainment/music/spotify-now-lets-you-share-what-youre-listening-to-in-real-time-via-chat-173749120.html?src=rss

SteamOS’s slow march across the Windows-dominated PC gaming landscape is continuing to creep along. At CES this week, Lenovo announced it will launch a version of last year’s high-priced, high-powered Legion Go 2 handheld with Valve’s gaming-focused, Linux-based OS pre-installed starting in June. And there are some intriguing signs from Valve that SteamOS could come to non-AMD devices in the not-too-distant future as well.

A new SteamOS-powered Legion Go 2 isn’t exactly shocking news given how things have been going in the world of PC gaming handhelds. Lenovo became the first non-Valve hardware maker to embrace the Windows alternative when it announced a SteamOS-compatible version of the lower-end Legion Go S almost exactly a year ago. When that version hit the market last spring, Ars testing found it actually performed better than the Windows-based version of the same hardware on many popular games.

Valve has also been working behind the scenes to expand SteamOS’s footprint beyond its own hardware. After rolling out the SteamOS Compatible software label last May, SteamOS version 3.7 offered support for manual installation on AMD-powered handhelds like the ROG Ally and the original Legion Go.

Read full article

Comments