How Did the FBI Get Nancy Guthrie’s Nest Doorbell Footage?

Like millions of Americans, I’ve been watching the news of Nancy Guthrie’s disappearance with concern—so I was somewhat relieved when the FBI announced they were releasing new footage of a suspect. Finally, the case had something to go on, even if it was only doorbell video of a masked stranger.

When I saw the footage, I assumed this was something the FBI had in their possession since the beginning, and had finally decided to release to the public. But that’s not what happened at all. If you have been following this case closely, you may know that law enforcement had previously confirmed that Guthrie’s Google Nest camera was disconnected (presumably by the perpetrator), and that she did not have a subscription that would store video either on the doorbell or in the cloud. Yet despite the fact the doorbell should have been a dead end, the FBI has seemingly produced this video out of thin air.

If you have a Google Nest device in or attached to your home, this might give you pause. Sure, it’s one thing if law enforcement is able to obtain video from your subscription or from the device itself. But if you don’t keep video records on your Nest, it seems it is still possible to retrieve the footage. How did the FBI do this, and what does it mean for the privacy of your Nest devices?

The FBI likely pieced the video together from fragments

The short answer is that we don’t really know for sure how the FBI got the footage, but there are a few leads. According to FBI Director Kash Patel, the Google Nest footage was recovered “from residual data located in backend systems.” That’s pretty vague, though the FBI isn’t necessarily known for its transparency.

According to experts that spoke to NBC News, however, it is possible to obtain data from the “complex infrastructure” of cloud-based cameras, including Google Nest devices. Retired FBI agent Timothy Gallagher told NBC News that Guthrie’s Nest camera might have sent images to Google’s cloud service, or at least stored data points locally throughout the hardware of the device, even though she wasn’t paying for a Nest subscription. The FBI could have obtained the footage from the cloud this way, or pieced together the video from those data points.

Both possibilities track, based on how Nest cameras work without a subscription: While you need to pay Google in order to save video clips from your Nest cameras, some Nest devices record event histories and store them on-device. The third-gen wired Nest Doorbell can save up to 10 seconds of clips, while the first and second-gen wired doorbells can save up to three hours of event history, all without a subscription. They also support live video feeds when motion is detected, which could impact the video data points saved to the device or cloud.

It’s entirely possible the subject walking up to the camera triggered the doorbell to save an event history. But since it took the FBI so long to produce the footage, and since the director claims it was obtained from “residual data,” my guess is it wasn’t readily available in Guthrie’s Google Home app. Maybe the event history saved to the cloud, but it wasn’t clear where it was located. Maybe it was overwritten, but the FBI was able to build it back up with recovered data points. My guess would learn toward the latter, as authorities did say the camera had been disconnected. Unfortunately, we don’t have a definitive answer at this time, even if the theory is sound.

I’ve reached out to Google for comment, and will update this piece if I hear back.

Should you get rid of your Nest camera over privacy concerns?

Based on what we know, it doesn’t really seem like your Nest doorbell or camera is a fourth amendment disaster waiting to happen—but I don’t blame anyone for being concerned. After all, if you don’t have a Nest subscription, you might have been comforted by the thought that none of your footage was being saved anywhere, meaning law enforcement or other authorities would have nothing to seize if you somehow popped up on their radar. That doesn’t necessarily appear to be the case.

That said, without a subscription, you don’t have access to a collection of all clips your Nest camera has ever recorded. You might have a limited event history saved, based on motion detection, but that will be limited to three hours of data. Your device might have data points that an organization like the FBI could theoretically use to restore footage, but that’s likely true for any camera or smart doorbell system—not just Nest.

Also, this is not a Ring situation—Google hasn’t partnered with organizations like Flock to help law enforcement request footage from users. Nest also lacks Ring’s “Search Party” feature, which can turn a neighborhood into a kind of surveillance state, and probably not just to search for lost dogs. I’m not dismissing every security and privacy concern, of course: By putting a commercially-available smart camera on your front door, you are placing your data in the hands of companies like Google or Amazon. If you want to eliminate the risk of the FBI obtaining your doorbell footage, you simply can’t have a doorbell with a camera. But barring a warrant, or a Nancy Guthrie-level situation, the chances of your Nest doorbell footage actually being used against you seem rather slim.

AMD Medusa Halo With Up To 24 Cores May Use LPDDR6 For Huge Bandwidth Gains

AMD Medusa Halo With Up To 24 Cores May Use LPDDR6 For Huge Bandwidth Gains
If you read this site regularly, you probably know about AMD’s Ryzen AI Max series. Codenamed Strix Halo, this is AMD’s massive mega-chip with up to 16 CPU cores and Radeon RX 7600 XT-level integrated graphics. The next-generation version is thought to be codenamed Medusa Halo, and while we’ve heard some wild rumors about these parts in the

TikTok US launches a local feed that leverages a user’s exact location

TikTok US just launched a local feed for users to “get the inside scoop on must-try restaurants, shops, museums and events.” This is done by leveraging the exact location of people that are using the app and comes after a change in the platform’s terms of service that says the app can do just that. The platform’s terms of service used to note that it could collect approximate locations, but the sale to US investors looks to have changed that to precise locations.

This is an opt-in feature, despite the app potentially collecting this data whether the feed is activated or not. The feed is set to “off” by default, but can be changed via a trip to settings.

The local feed doesn’t show your neighbors or people you might vibe with to help solve that pesky loneliness epidemic. Instead, it prioritizes local businesses and will highlight nearby events, shopping suggestions and restaurants to try.

The feed.
TikTok

This looks to be part of a broader push to attract small businesses to the app, both as content producers and as advertisers. As TechCrunch notes, this could also help insulate the company from future regulation and increased scrutiny, as it could point to the many small businesses that rely on its services. 

TikTok states that over 7.5 million businesses use the platform in the US to reach customers. However, this data is sourced from an Oxford Economics report from before a group of investors finalized a deal for the US version of the app.

Supporting local businesses is a noble goal, but users will have to consider whether or not the value of a dedicated feed is worth the privacy risk. Oracle is a prominent investor in the new American TikTok, and company founder Larry Ellison once said “citizens will be on their best behavior” when they are being constantly surveilled.

This local feed isn’t exactly a new idea. TikTok has been trying something similar in Europe since the tail-end of last year. It has shown up in the UK, France, Italy and Germany.

This article originally appeared on Engadget at https://www.engadget.com/big-tech/tiktok-us-launches-a-local-feed-that-leverages-a-users-exact-location-170651916.html?src=rss

Microsoft’s February Patch Tuesday Update Fixes Six Zero-Day Exploits

Microsoft’s February security update is a big one. This latest “Patch Tuesday” fixes 58 vulnerabilities in total, six of which are zero-day flaws. As a reminder, a zero-day is a vulnerability that has been either actively exploited in the wild or publicly disclosed before an official fix is released by the developer.

As BleepingComputer reports, security flaws were found in the following categories: 25 elevation-of-privilege vulnerabilities, five security feature bypass vulnerabilities, 12 remote code-execution vulnerabilities, six information disclosure vulnerabilities, three denial of service vulnerabilities, and seven spoofing vulnerabilities. Three of the elevation of privilege vulnerabilities and two of the information disclosure vulnerabilities are considered “critical.” (These numbers do not include the three Microsoft Edge vulnerabilities patched earlier in February.)

Patch Tuesday updates are typically released around 10 am PT on the second Tuesday of every month, and your device should receive them automatically. BleepingComputer reports that this month’s release also includes Secure Boot certificate updates for 2011 certificates that are expiring in June.

Six zero-days patched in February

Three of the six actively exploited zero-days fixed in February are security feature bypass vulnerabilities:

  • CVE-2026-21510: This is a flaw the Windows Shell that allows an attacker to execute content without warning or gaining user consent, though the user does need to open a malicious link or shortcut file.

  • CVE-2026-21513: This MSHTML Framework vulnerability allows an unauthorized attacker to bypass a security feature over a network. Microsoft has not released details on how this flaw was exploited.

  • CVE-2026-21514: This vulnerability in Microsoft Word allows an attacker to bypasses OLE mitigations in Microsoft 365 and Microsoft Office once a user has opened a malicious Office file.

All three of the above flaws have been attributed to Microsoft Threat Intelligence Center (MSTIC), Microsoft Security Response Center (MSRC), Office Product Group Security Team, and Google Threat Intelligence Group along with an anonymous researcher for CVE-2026-21510 and CVE-2026-21514.

Two of the zero-days are elevation of privilege vulnerabilities. CVE-2026-21519 is a Desktop Windows Manager flaw that allows an attacker to gain SYSTEM privileges, while CVE-2026-21533 is a Windows Remote Desktop Services flaw that allows an attacker to elevate privileges locally. The former has been attributed to MSTIC and MSRC, while the latter was discovered by the Advanced Research Team at CrowdStrike.

Finally, CVE-2026-21525 is a denial of service vulnerability in the Windows Remote Access Connection Manager that allows an unauthorized attacker to deny service locally. This flaw was discovered by the ACROS Security team with 0patch—it was reportedly found in a public malware repository in December 2025.

Are CDs Making a Comeback? A Statistical Analysis

Reports of the compact disc’s death may have been slightly premature, according to a new analysis from Stat Significant that finds CD sales as a share of U.S. music industry revenue have quietly stabilized after years of steep decline. RIAA data shows CD revenue share fell from 7.15% in 2018 to 3.04% in 2022 but has since flatlined at roughly 3%, coming in at 3.14% in 2023 and 3.06% in 2024.

Google search traffic for “CD Player” has ticked upward over the past 16 months after two decades of near-continuous decline, and a May 2023 YouGov poll found 53% of American adults willing to pay for music on CDs — ahead of vinyl at 44% and online streaming at 50%. Respondents under 45 were more likely to express interest in buying physical formats than older cohorts. But on the supply side, Discogs data shows vinyl remains the dominant format for new physical releases; artists have not meaningfully shifted back toward CD production.


Read more of this story at Slashdot.

Netflix is reportedly filming the Stranger Things Broadway show this week

Though the original series is very much done, Netflix is going to squeeze as much juice out of Stranger Things as it can. The company is said to be filming the Broadway production of Stranger Things: The First Shadow so it can offer up a recording on its streaming service.

Several public performances were canceled this week to accommodate filming, according to The Hollywood Reporter. They’ll recommence on February 15. Filming is taking place before the original Broadway cast leaves the production next month. 

Stranger Things: The First Shadow opened in New York City last year after debuting in London in 2023. It’s been a critical and commercial success, and it has won multiple Tony Awards. The play is a canonical prequel to Stranger Things and it fills in more of the backstory of Henry Creel, who becomes Vecna. The show’s final season digs into his past too.

Netflix hasn’t indicated when it will start streaming a recording of the play. This was inevitably going to happen at some point, though. Netflix has been busy expanding the Stranger Things universe with spin-off shows, such as the animated series Stranger Things: Tales From ‘85 (which will start streaming on April 23). A documentary that shows how Stranger Things: The First Shadow came together hit the streaming service last year.

This article originally appeared on Engadget at https://www.engadget.com/entertainment/tv-movies/netflix-is-reportedly-filming-the-stranger-things-broadway-show-this-week-165243046.html?src=rss

Intel Arc B390 Panther Lake Generational Performance Since The Gen9 Graphics Era

Last week on Phoronix we provided initial Linux graphics benchmarks for the new Xe3-based Arc B390 graphics found with the higher-end Panther Lake SoCs with 12 Xe cores. Those benchmarks showed great gains over recent generations of Intel graphics like with Lunar Lake, Meteor Lake, and even Alder/Raptor Lake… But what if you hold onto your laptop for even longer? In this article is an Intel integrated graphics comparison looking at the general performance and power efficiency going all the way back to the Gen9 graphics era for what seemed like an eternity of Gen9-derived graphics during the Skylake era.

How to Get Access to T-Mobile’s Free Live Translation Beta

Live translation is probably the most genuinely useful thing to come out of the AI boom, but if you want to use it during a phone call, you usually need to use a specific device or a separate app. T-Mobile is looking to change that. The carrier announced today that it will soon introduce live translation to all phones connected to its 5G or 4G networks, and to get in on the action, you’re going to want to sign up for the beta now.

According to a press release sent to journalists today, the new feature will kick in for you automatically once you’re selected for it, no matter what phone app or device you use. All you’ll need to do to access it is type in “87” on the keypad during a phone call. Which means that, yes, it will also be compatible with feature phones, aka classic-style flip phones with physical buttons.

How T-Mobile live translation works

The device you use doesn’t matter because all of the computing for the translation will happen on T-Mobile’s end, rather than on your device. The downside is that you won’t get to pick which AI model the translation uses, and T-Mobile hasn’t yet to provide any indication of which one it will use. You’ll also just have to trust T-Mobile’s servers with any audio recorded from your conversation. T-Mobile spokesperson Mason Miller told Lifehacker’s sister site PCMag via email that, “[T-Mobile does] not save call recordings or transcripts,” but the company will certainly ave to run your data through its servers at some point to make the feature work. By comparison, competing translation apps often rely on downloaded language packs and on-device models.

Still, I see where T-Mobile is coming from with this offering: When live translation is limited to specific devices or apps, it vastly impacts its usability, since both callers need to have a compatible device for it to work. Processing translation over the cloud makes it more likely you’ll be able to use it exactly when you need it—and as a bonus, only one caller will actually need to be on T-Mobile’s 5G or 4G network to pull this trick off.

While T-Mobile’s press release focuses on 5G, the carrier confirmed availability for the feature on 4G to The Verge earlier today. The Verge also reports that, in addition to dialing 87, beta participants will eventually be able to trigger live translation by saying “Hey T-Mobile” instead.

When T-Mobile live translations will go live

Testing for T-Mobile’s live translation will begin “for selected users” this spring, with more general availability planned for “later this year.” The feature will be free during the beta, although a surcharge might be added after it goes into wide release. “We will share more on pricing and plan details closer to commercial launch,” Miller told PCMag.

To sign up for the beta and put your hat in the ring for selection, head over to t-mobile.com/benefits/live-translation.

The Best Kitchen Gadgets to Make Cooking Weeknight Dinners So Much Easier

We may earn a commission from links on this page.

Cooking can be a creative outlet, a way of showing affection, and a way to take control of your health. But cooking can also be stressful and time-consuming, especially on a weeknight when you’re already exhausted from a long day at work and you’ve got a hungry family (or just yourself) to feed. Ordering in is always tempting, but that gets expensive and can have an adverse impact on your waistline.

You might already have some of the more obvious and established time-saving appliances in your kitchen, but you can always shave a few more minutes and adrenaline spikes off your nightly cook. These kitchen gadgets will make cooking weeknight dinners easier no matter what the menu looks like.

Snap-on strainers prevent you from dumping pasta in the sink

If you have ever had a weeknight dinner go off the rails due to a pot of pasta accidentally dumped in the sink during a straining misadventure, know that snap-on strainers exist. Just pop one onto your pot, and you can easily strain without worrying about the dreaded dump out (or a fourth-degree burn from pasta water). These strainers are flexible and will fit just about any pot or pan you need to strain out of.

An automatic pot stirrer will stir while you finish other tasks

Cooking is often a series of dull, repetitive tasks, and sometimes those tasks need to be performed simultaneously—so why not at least outsource all that pot stirring? This battery-operated device does just what it says: You place it in your pot or pan, press the button, and it stirs anything that needs it while you go and live your life (or chop vegetables).

“Souper Cubes” help you better portion food to freeze for later

Here’s a mistake I make over and over again when prepping sauces, stock, or soup for future dinners: I forget to divide it up before I pop it in the freezer. When it’s time to make that weekday dinner, I have plenty of pre-made sauce—or, rather, I have too much of it, and I either defrost the whole bit and waste some or try hacking off a piece. Enter: Souper Cubes. These are like ice cube trays for food, and make it easy to freeze precise amounts of prepped or leftover food.

Oven guards protect your hands from hot racks

Anyone who cooks regularly has the minor wounds and scars to show for it—including the tell-tale burns from hurriedly grabbing stuff from a hot oven. Oven rack guards allow you to throw caution to the wind when pulling trays out of a crowded oven, even when reaching into a lower rack or grabbing something that’s migrated to the rear of the oven.

A self-stirring cooker lets you outsource most of the meal’s work

If an automated pot stirrer is cool, a cooker that also stirs itself is even cooler. If your life goals include being able to make dinner every night while somehow doing other things, this is the kitchen appliance you need. It can cook a wide range of meals more or less on its own, and will stir meals automatically. Just load up your ingredients, set your parameters, and walk away.

An automatic can opener saves time and effort

Cooking using canned ingredients is nothing to be ashamed of, but opening all those cans can be a chore that keeps you away from other cooking tasks. Enter the automatic can opener—just pop it on a can, press the button, and let it do its thing while you do literally anything more useful with your time.

A warming mat will keep everything hot for you

If your dinner plans involve more than one dish, you know the stress of being on the clock when something is ready long before the rest of the meal. Serving up cold sides or sauces is no fun, so a warming mat like this is the answer. Just place dishes on it as they’re ready and keep working on the balance of the meal, and everything will still be piping hot by the time you’re ready to sit down.

A divided skillet lets you cook multiple things at once

We’ve all been there: You need to fry up several different things, but you only have one skillet. Your choice is to desperately cook and put aside each portion of the meal, or get yourself a divided non-stick skillet that makes it easy to cook several things simultaneously, speeding up your dinner process and ensuring that everything hits the table hot and ready.

A “Thaw Claw” can speed up your defrosting process

If you’re like me and you consistently forget to plan ahead when it comes to thawing out frozen ingredients ahead of time, you also know the struggle of trying to speed up the process. Submerging frozen meat in cold water is a proven way of speeding up the thawing process—unless your frozen goods just float to the surface. Enter the Thaw Claw, a simple device that clamps your frozen food to the bottom of your sink or bowl so it can defrost more quickly and effectively.

Digital measuring spoons save you time on measuring

Saving time when cooking dinner is all about accumulating small wins. The time spent weighing and measuring all the ingredients for your meal adds up, so having a digital measuring spoon can make the process faster and more efficient, since you won’t have to place anything on a scale, adjust, and then use a separate implement to transfer it to your pots and skillets. Just measure as you scoop and keep moving.

“Fry Away” disposes of oil or grease more easily

Cleanup is part of the time and effort of any mid-week meal, and if you were tired before you started making dinner, you’re not going to be less tired after eating. So make cleanup a little easier with Fry Away, which makes disposing of all that grease and oil a very simple process: Add some to hot oil or grease, let it cool, and then peel off the somewhat gross results and toss into the trash. Not having a jar of old oil sitting on the kitchen counter (or not calling a plumber to clean your drains if you’re too lazy to have a jar of old oil on your kitchen counter) or needing to scrub away at a greasy pan? This is the way.

HP Now Rents Gaming Laptops

HP has quietly launched a gaming laptop subscription service called the OMEN Gaming Subscription that lets customers pay a monthly fee to use one of several gaming laptops but never actually own the hardware, even after paying well past the machine’s retail price.

The service ranges from $50 a month for an HP Victus 15-inch laptop with an RTX 4050 to $130 a month for an Omen Max 16 with an RTX 5080. At current sale prices, subscribers would exceed the cost of buying the laptop outright within 16 to 19 months; at MSRP, that window stretches to roughly 25 months. In exchange for giving up ownership, subscribers get yearly hardware upgrades, next-day replacements, 24/7 support, and an ongoing warranty. There is a 30-day trial period, but cancelling in the second month triggers steep early termination fees — $550 for the Victus 15 and $1,430 for the Omen Max 16. Cancellation becomes free only after the 13th month. HP also offers accessories like the HyperX Cloud Alpha Wireless headset as add-on rentals for $8 a month.


Read more of this story at Slashdot.

[$] Evolving Git for the next decade

Git is ubiquitous; in the last two decades, the version-control
system has truly achieved world domination. Almost every developer
uses it and the vast majority of open-source projects are hosted in
Git repositories. That does not mean, however, that it is
perfect. Patrick Steinhardt used his main-track session at FOSDEM 2026
to discuss some of its shortcomings and how they are being
addressed to prepare Git for the next decade.