Linux distros are about to get a killer Windows feature: The Blue Screen of Death

Linux distros are about to get a killer Windows feature: The Blue Screen of Death

Enlarge (credit: hdaniel)

Windows’ infamous “Blue Screen of Death” is a bit of a punchline. People have made a hobby of spotting them out in the wild, and in some circles, they remain a byword for the supposed flakiness and instability of PCs. To this day, networked PCs in macOS are represented by beige CRT monitors displaying a BSOD.

But the BSOD is supposed to be a diagnostic tool, an informational screen that technicians can use to begin homing in on the problem that caused the crash in the first place; that old Windows’ BSOD error codes were often so broad and vague as to be useless doesn’t make the idea a bad one. Today, version 255 of the Linux systemd project honors that original intent by adding a systemd-bsod component that generates a full-screen display of some error messages when a Linux system crashes.

The systemd-bsod component is currently listed as “experimental” and “subject to change.” But the functionality is simple: any logged error message that reaches the LOG_EMERG level will be displayed full-screen to allow people to take a photo or write it down. Phoronix reports that, as with BSODs in modern Windows, the Linux version will also generate a QR code to make it easier to look up information on your phone.

Read 2 remaining paragraphs | Comments



Source: Ars Technica – Linux distros are about to get a killer Windows feature: The Blue Screen of Death

Use These Five Strategies for Finding an Affordable Rental in an Unaffordable City

Living in a city like New York, San Francisco, or Boston often means forking over a large portion of your income to pay your rent—especially if you don’t want to live with roommates. This often prompts those living in more affordable housing markets to wonder, or even ask, why you don’t simply pack up your life and move somewhere cheaper.

While that might be an option for some people, others have ties to pricey cities, like their job or family, or have other reasons why relocating isn’t on the table. But until more affordable housing is available, people who call those major metro areas home will have to figure out how to stretch their rent budget as far as possible. Because strategy is important in real estate, I reached out to Andrea Neculae, a research analyst at RentCafe, for some insider tips on finding a rental you can afford in an unaffordable city. Here’s what to know.

How to find an affordable rental in an expensive city

A recent report from RentCafe determined how much living space you can get for $1,700 per month (roughly the national average rent) in the 50 largest U.S. cities. In one Memphis neighborhood, you can find a rental home with nearly 2,000 square feet of living space for $1,700. Meanwhile, in Manhattan, you’ll barely be able to rent a 200-square-foot space for the same amount.

Here are Neculae’s takeaways from analyzing those data—which, she says, might help improve your chances of finding a rental that won’t break the bank in a notoriously expensive city.

Find the sweet spots

When analyzing the study data, Neculae and the rest of her team noticed a pattern emerging in many of the larger rental markets: The ring of ZIP codes surrounding a city’s downtown area often has the best balance of price and location. “These spots can be real gems without costing a fortune,” she tells Lifehacker. That said, if you wander too far outside the city center, you might find that the cost of rent spikes in neighborhoods with a mix of urban and suburban features. “These are now highly coveted by older millennials with families looking for urban amenities in a suburban setting,” Neculae explains.

Relocate your home office

It’s no surprise that people who work remotely often want a rental with space for a home office. But before blowing your budget on an extra room, Neculae suggests looking into rentals near coworking spaces. You’ll need to do the math, but it could work out to be cheaper to rent a desk in a shared office than to pay more to rent a home with room for an office. “In cities like Chicago and New York, for example, giving up a spare bedroom could save you anywhere between $9,000 to $20,000 each year,” she notes.

Consider a transit-oriented development

According to Neculae, you may be able to save money living in a transit-oriented development (TOD). A combination of residential and commercial areas, TODs are designed to maximize access to public transit, offering easy access to work, and city amenities, without having to rely on a car. “Plus, several states have announced initiatives to build more housing close to transit, so you can expect to see more of these projects in the future,” she adds.

Look for rentals in the fall or winter

Typically, more people are on the hunt for rentals in the spring and summer, meaning there’s more competition over properties, and less room for negotiation at this time of year, Neculae explains. “If you’re hoping to find a good deal, consider looking in the autumn and winter months when rental demand is typically lower, giving you the chance to score the apartment you love—often with a rent special,” she says. Neculae recommends starting your search early in January or February for the best chances of finding a property that meets your needs at a decent price.

Don’t ignore the fees

If you find an apartment with rent so low that it seems too good to be true, there’s a good chance that it’s either a scam, or you haven’t factored in all the various fees the resident is required to pay on top of their rent. “These not-so-obvious charges like application fees, security deposits, charges for trash collection, or pet fees can pile up to a significant amount that would raise your monthly expenses,” says Neculae.



Source: LifeHacker – Use These Five Strategies for Finding an Affordable Rental in an Unaffordable City

OnePlus 12 Teardown Reveals A Massive Vapor Chamber To Battle Temps

OnePlus 12 Teardown Reveals A Massive Vapor Chamber To Battle Temps
The OnePlus 12 has officially launched (in China, anyway) and yet, the phone continues to reveal pleasant surprises from within its svelte chassis. A recent teardown video just exposed how much OnePlus is serious about keeping your device cool during heavy gaming sessions or when used in warmer climes. 

Hong Kong-based YouTube channel WekiHome

Source: Hot Hardware – OnePlus 12 Teardown Reveals A Massive Vapor Chamber To Battle Temps

Nanoleaf's String Lights Are Worth It for Your Christmas Tree

Holiday lights are possibly the best application of smart features—they make it easy to turn your lights on and off from inside, or to be scheduled. When you add smart features to LED lights, they turn holiday lights into a magical color- and motion-making machine that you can change with the touch of your fingertips. If you’re looking for the easiest smart string lights to control, Nanoleaf smart string lights are what you’re looking for. 

Upscale quality with intense brightness and color range

I am, admittedly, already smitten with Nanoleaf products, and have spent fall in hue-induced bliss inside my living room. Once I learned they had outdoor string lights, it was an easy sell for me. For now, Nanoleaf is only producing one holiday light, these indoor/outdoor strings. They’re 65 feet long, broken into two strings that can mirror each other. They’re all on black wire, and I imagine that the perfect application is wrapped around a Christmas tree, much as their marketing suggests. These are waterproof, rated IP44, and suggested for both indoor and out.

These are small, sturdy led lights that don’t feel cheap. Each light has 250 lumens, which is substantial, and a 130-degree beam; there are about 250 lights on the string. In other words, these lights demand to be seen.  The LEDs are RGB, so they support about 16 million colors including white, but don’t have the expanded palette of RBGWW, which the Govee Permanent Lights Pro have. 

Multiple connection modalities

Nanoleaf products are all Matter-enabled, which makes it possible to add them to any Matter hub, but they also paired easily into the Nanoleaf app; you’ll want to do that anyway, since the molecular level controls are all available there. Nanoleaf also uses Bluetooth and wifi—you can control the major functions via wifi, but you need a Bluetooth connection to affect changes like colors.  

An immense spectrum of achievable color

The Nanoleaf app is where these lights really stand apart. It helps to compare them to the Govee smart string lights, which I’ve reviewed as well. The Nanoleaf app doesn’t give you every option or tool in the world, but because it gives you just enough options, in precisely the place you’d expect. In other words, you’re more likely to achieve a color and motion design you want with Nanoleaf. It’s unfortunate that Nanoleaf only offers this one style of outdoor light, but you could still achieve a lot with an entire house lit with them. 

screenshots from the Nanoleaf app
it’s easy to navigate to, and group your Nanoleafs in the app. From there, you can select one color, or a preset scene, and most of the out of the box scenes are really usable and tasteful. Remember, these colors will become an ombre in practice. Nanoleaf uses gradients to transition between colors.
Credit: Nanoleaf

Nanoleaf starts with presets set into two options: color- and music-reactive. In the Nanoleaf app, you can see the actual color band that’s going to be used, unlike the Govee app where they use words and expect you to guess the colors (with stunning inaccuracy). You can obviously set the entire light string to one color, including a pretty decent-looking white. While you can assign a maximum of six colors to your string as a base, the app will handle color shifts between them, creating really gorgeous ombres and color runs of gradients. The lights don’t have to have motion, but it can, and that motion can be sound-reactive or not, just like Govee lights. 

Creating your own color scenes is easy

You can edit any of the presets to change the colors or motion, but you can also create your own from scratch. Doing so is far easier in the Nanoleaf app: You hit a plus sign, and either pick your own colors one by one, or start with a massive list of color themes. Then you decide what kind of motion you’d want to use. Nanoleaf does a great job of telling you how the motion acts, and lets you adjust it. 

screenshots from the Nanoleaf app
When you create your own scene from scratch, you can start with a preset palette, and there are many, or roll your own, as I did here, with pinks. Then you choose a motion, if you want, and it clearly shows what each motion does.
Credit: Nanoleaf

These lights handle gradients so elegantly. A rainbow is represented by six colors in the app, but the lights, when you select that rainbow, clearly display millions of colors to achieve that color run, seamlessly transitioning between colors. It’s why I think trees are the best use of these lights, to see one color run go up a tree. 

But what I found even more appealing was the way Nanoleaf handles motion. There are 10 or so options for motion in the Nanoleaf app, from twinkle to flow and organic. Each of these produce incredibly elegant, advanced-looking motion. “Fireworks” really impressed me by being able to accurately capture the way a campfire looks. A single star can chase across the light string in another setting. These settings can turn color scenes like red, green and white—which can look a little unsophisticated—into an impressive array.

Nanoleaf holiday string lights

Credit: Amanda Blum

Nanoleaf holiday string lights

Credit: Amanda Blum

Nanoleaf holiday string lights

Credit: Amanda Blum

Not-so-great bluetooth range and no expansion capacity

There are a few downsides to the Nanoleaf string lights. First, you can’t string multiple lights together. Each has to be run on its own, which means connecting each string to a power supply. This is also true for Govee’s version of these lights. You can, of course, group these lights together and then assign the same scene to each of the lights, but in most applications, you want to string lights together. Second, Govee’s bluetooth is sturdier than Nanoleaf’s. While connecting wasn’t problematic, I didn’t have the range Govee offers, so I often had to move closer to the lights. 

Great for a one-off application like your tree

Compared to Govee, I prefer the app experience on Nanoleaf. It’s not even close—you are much closer to achieving the effect you want, quickly, with Nanoleaf.  I prefer the appearance of the lights, overall, from the bulb to the wire. But, since this is the only string light or outdoor product that Nanoleaf offers, it’s limiting. In a small application like a Christmas tree, I’d choose Nanoleaf, but for a whole house, Govee would have the advantage. Price-wise, Govee is also cheaper at $89, vs $119 for the Nanoleaf. While that’s more expensive than most string lights, these have a lot more to offer because of their smart functionality. Once the season is over, the lights can go behind a couch or mirror in your living room to add some reactive glow while playing video games or music.



Source: LifeHacker – Nanoleaf’s String Lights Are Worth It for Your Christmas Tree

Windows 11 2023 Update Is Slowing Down Games For Some Users, Here's A Fix

Windows 11 2023 Update Is Slowing Down Games For Some Users, Here's A Fix
User reports have unveiled gaming performance degradation problems in Microsoft’s latest Windows 11 23H2 update. The problem is reportedly related to a Windows Defender bug that is choking or blocking off system resources, causing gaming performance to slow. Thankfully Microsoft has provided a fix for the problem, but it requires several settings

Source: Hot Hardware – Windows 11 2023 Update Is Slowing Down Games For Some Users, Here’s A Fix

How to Watch the 2023 Game Awards Tonight

The Game Awards are back. Host Geoff Knightley, who started The Game Awards back in 2014, is set to take the stage tonight, Thursday Dec. 7, to honor some of the best games of the year. If you’re looking to tune in to see if your favorite game of 2023 will be honored, here’s what you need to know.

When and where to watch The Game Awards

Unless you snagged tickets to the event, you’re most likely watching The Game Awards at home like the rest of us. Luckily, it’s super easy to do. The show will begin airing at 7:30pm ET (4:30pm PT) on Thursday, Dec. 7. As for where you can stream the awards, well, the choice is yours. The Game Awards is partnering with 11 different outlets, all of whom are hosting the show live. That includes usual suspects like YouTube and Twitch, but the list includes plenty of others, from Steam, to Facebook, to X (Elon will be thrilled)—even Google Play will host.

Of course, I’m partial to YouTube livestreams since I’m always on the site to begin with. The stream is live now if you want to keep it in the background until tonight:

The Game Awards also has partners outside the US, with dedicated streamers available in China, India, Japan, South Korea, Southeast Asia, and Germany.

Which games are nominated?

The Game Awards, like all award shows, has many different categories they’re honoring tonight, from Best Game Direction, to Best Narrative, and Best Multiplayer. In total, there are 31 award categories that will be featured tonight, so you’ll see plenty of games and devs celebrated. You can find a full list of the awards and nominees here. For me, I’m most interested in who will win Game of the Year, which comes down to the following titles:

  • Alan Wake 2

  • Baldur’s Gate 3

  • Marvel’s Spider-Man 2

  • Resident Evil 4

  • Super Mario Bros. Wonder

  • The Legend of Zelda: Tears of the Kingdom

Damn, it was a good year for gaming.

Win a Lenovo Legion

The Game Awards is also partnering with Lenovo to offer 100 Legion handheld gaming devices throughout the night. If you’re interested, head to the official content page during the show and punch in your info to enter.



Source: LifeHacker – How to Watch the 2023 Game Awards Tonight

You Should Join the Audubon Society’s Christmas Bird Count This Year

The annual Christmas Bird Count (CBC) conducted by the Audubon Society has been an annual event since the beginning of the 20th century. As an answer to declining bird populations, the tradition began in 1900 by early proponents of conservation to record what they feared were shrinking bird populations and promote bird watching as a hobby. Joining your local bird count can be a holiday tradition to treasure, connecting to the outdoors and helping to gather information on birds and habitat at the same time.

What is the Christmas Bird Count?

As a participant in the count, you will get connected with your local circle and contact the organizer for details. Each count occurs on one calendar day between December 14th and January 5th within the boundaries of a 15-mile circle on the map, recording not just each species that is seen or heard, but each individual bird. Participants will tally their counts and turn in their data to their count compiler, who is then tasked with turning in the data to the Audubon Society.

Find your local count

To find your circle, you can start on the map page that lists the existing circle for the Audubon CBC. Each circle has the location and contact information for the compiler listed if you click on it so that you can arrange to participate in your local count. There are locations all over North and South America, so it’s likely that there’s a circle near you.

If you don’t have a local count

If you don’t see a count near you, you can either choose to participate in the National Backyard Bird Count (NBBC) as an alternative, or you can apply to start your own circle if you’re a skilled and ambitious bird watcher. Keep in mind that organizing your own count requires that you have at least a few other participants willing to pitch in and that you have a solid area in mind where the count can be conducted.

The count is for everyone

The CBC is open to anyone who wants to participate through a circle, and is conducted much the same way a census would be. It’s free to participate and is open to all skill levels. If you’re new, you will be paired up with a more experienced birder so you can learn the ropes. This can be a great family activity, but I wouldn’t bring younger kids, who might have shorter attention spans and be more vulnerable to inclement weather.

Be prepared

You should be prepared to stay outdoors for the whole time the count goes on unless you’re lucky enough to live within the boundaries of a circle. You are responsible for bringing your own binoculars and weather-appropriate clothing to the count. If you reside inside of one of the circles, you can participate from home simply by recording all of the birds that visit your feeder and then turning in your results to the compiler.

How the data from your count gets used

The data that’s collected during the Christmas Bird Count is used as a resource for science-based publications, studies, and as a resource for those studying wildlife and ecology. Summaries of the data collected every year are also published for the public and can be found online through the Audubon Society website.

Stay in the loop

To follow the data as it comes in and stay informed on community science events from the Audubon Society, you can sign up for American Birds and check out the CBC Live Tracker for photos and updates from Christmas Bird Count participants. If you choose to participate in the count, you can also upload your photos for others to see how your count is going.



Source: LifeHacker – You Should Join the Audubon Society’s Christmas Bird Count This Year

Meta defies FBI opposition to encryption, brings E2EE to Facebook, Messenger

An iPhone screen displays the app icons for WhatsApp, Messenger, Instagram, and Facebook in a folder titled

Enlarge (credit: Getty Images | Chesnot )

Meta has started enabling end-to-end encryption (E2EE) by default for chats and calls on Messenger and Facebook despite protests from the FBI and other law enforcement agencies that oppose the widespread use of encryption technology. “Today I’m delighted to announce that we are rolling out default end-to-end encryption for personal messages and calls on Messenger and Facebook,” Meta VP of Messenger Loredana Crisan wrote yesterday.

In April, a consortium of 15 law enforcement agencies from around the world, including the FBI and ICE Homeland Security Investigations, urged Meta to cancel its plan to expand the use of end-to-end encryption. The consortium complained that terrorists, sex traffickers, child abusers, and other criminals will use encrypted messages to evade law enforcement.

Meta held firm, telling Ars in April that “we don’t think people want us reading their private messages” and that the plan to make end-to-end encryption the default in Facebook Messenger would be completed before the end of 2023. Meta also plans default end-to-end encryption for Instagram messages but has previously said that may not happen this year.

Read 11 remaining paragraphs | Comments



Source: Ars Technica – Meta defies FBI opposition to encryption, brings E2EE to Facebook, Messenger

Phew! Google Rolls Out A Fix To Restore Missing Drive Files

Phew! Google Rolls Out A Fix To Restore Missing Drive Files
A recent glitch in the desktop Google Drive app caused some files to disappear from users’ cloud storage containers. It’s been a few weeks of Google asking for patience, but it has now released a fix. Assuming affected individuals followed Google’s recommendations, it should be possible to restore the missing files now.

This issue first

Source: Hot Hardware – Phew! Google Rolls Out A Fix To Restore Missing Drive Files

The Best Gifts for DIYers (That Aren’t Tools)

For someone who’s just starting out on their DIY journey, or for those who already seem to have just about every tool you could think of, it can be hard to choose tools to gift. But the DIY community isn’t just about tools, and makers can use other things besides glue guns and 3D printers to hone their craft. There are lots of non-tool gifts that anyone from novices to DIY masters would love.

Books

Books by DIY masters, experts on a particular subject, or personal stories related to a particular DIY subject can be a good option. Here are a few of my favorites:

  • For the renter in your life who’s looking to become more handy, Safe and Sound: A Renter-Friendly Guide to Home Repair by Mercury Stardust (aka, The Trans Handy Ma’am) is the perfect gift. Her focus on empowering ordinary people to tackle all their maintenance tasks with confidence is peppered with both practical advice as well as guidance on how to overcome your apprehensions about your maintenance needs.

  • For woodworkers, Working with Hand Tools: Essential Techniques for Woodworking by Paul N. Hasluck is a guide to the traditional hand tools and methods of woodworking. The book guides readers not just about tools, but also has project guides and inspiration for shop set-up, including work benches and clamps that can be made by hand.

  • For gardeners, How to Grow: Nurture Your Garden, Nurture Yourself by Markus Bridgewater (aka, Garden Marcus) is more than just a treasure trove of gardening wisdom; it’s also a calming and inspiring journey peppered with relatable personal stories. His book is a must-read for anyone looking to gardening for improved mental and physical health.

Classes and workshops

Classes and workshops are another great gift for your favorite DIY enthusiast—but matching the class to the skill level and particular interests of your recipient is key.

For online classes, Udemy has a variety of woodworking and home repair classes to offer. But for many makers, in-person classes tend to be more fulfilling because the materials and tools will be arranged by the instructor, and there will likely be a workspace set up for the desired project. These types of classes can be found through local community colleges, libraries, maker spaces, and sometimes through private programs hosted by shops or studios. The nice thing is that the gift of a class like this offers some community building for a new maker or DIYer as well as instruction.

Maker memberships

A membership to a maker space for your favorite DIY craftsperson who maybe doesn’t have room for a garage or basement shop is a really good gift. Maker spaces often include access not just to space, but to some tools as well, so for someone who is either looking to expand their skills or who is newer and needing to try out some different techniques or projects, a maker space can be just the right fit. These memberships can range from a $10 day pass to as much as $600 per month, depending on the space and location, but many of them tend to be in the $35 to $60 per-month range. 

Tool library membership

Another membership you could consider for someone who is a new homeowner or just getting into gardening or DIY is membership to a tool library. Although some tool libraries are free, others will charge an annual fee for access to borrowing tools, equipment, and other materials. These memberships can range from $10 to $100 per year, and they often also offer classes in repair and maintenance. They’re also an excellent resource for getting involved in your local DIY and repair community.

Software subscriptions

Craftspeople, from beginners to experts, often use planning software to design and sketch their projects. This software can also be used to make sure that objects will fit where you plan to put them, and to try out layouts and designs before you start building. While there are some free apps out there for these purposes, having access to more advanced features can make the software easier to use.

  • Sketchup is a 3D rendering program you can use to draw all parts and components of a project to scale.

  • Realtime Landscaping Pro is another option used primarily for outdoor spaces. This software will allow your favorite gardener to design and visualize plants, decks, sprinklers location, and even holiday displays using photos of the exterior of your home to make it realistic.

  • For creating detailed schematics and layouts for more complex projects, Autodesk is a handy gift for a carpenter, designer, or builder. The various packages range from $100 to more than $4,000 a year, but the most common tools for DIYers will be between $100 and $600 per year.



Source: LifeHacker – The Best Gifts for DIYers (That Aren’t Tools)

Report: Early 2024 will bring M3 MacBook Airs and first new iPads in over a year

Apple's 15-inch M2 MacBook Air.

Enlarge / Apple’s 15-inch M2 MacBook Air. (credit: Andrew Cunningham)

The MacBook Air is Apple’s most popular laptop, and when the Apple M1 and M2 chips landed, they came to the Air first. That changed with the M3 chip generation, which came to the MacBook Pro and iMac first but left the Air untouched.

That situation should change early next year, according to a report from Bloomberg’s Mark Gurman. Apple is reportedly preparing to launch updates to the MacBook Air, as well as several new iPad models, in “the March time frame.” Apple hasn’t released any new iPads in 2023, and the 13-inch M2 MacBook Air was introduced in July of 2022.

Gurman says not to expect design changes from the M3 Air. The M2 version introduced a new non-tapered design with a display notch, a new keyboard, and a MagSafe port, and the M3 Air should look externally identical.

Read 4 remaining paragraphs | Comments



Source: Ars Technica – Report: Early 2024 will bring M3 MacBook Airs and first new iPads in over a year

GTA 6 Will Almost Definitely Snub PC Gamers At Launch And Be Console Only, But Why?

GTA 6 Will Almost Definitely Snub PC Gamers At Launch And Be Console Only, But Why?
Rockstar Games has an absolute monster game on its hands, and it surely knows it. With record breaking views on the highly anticipated trailer for GTA 6, gamers were tripping over themselves to get a sneak peek at what’s coming (it’s amassed over 120 million views in just two days). With months of only scattered information and leaks being

Source: Hot Hardware – GTA 6 Will Almost Definitely Snub PC Gamers At Launch And Be Console Only, But Why?

The Milky Way will probably devour all the tiny galaxies that surround it

a colorful, roughly circular cloud with stars against a dark background.

Enlarge / An infrared image of one of the Milky Way’s satellite galaxies. (credit: NASA/JPL-Caltech/STScI)

We are not alone—at least as a galaxy. About 50 dwarf galaxies surround the Milky Way. But when its intense gravity inevitably draws them to venture too close, they will probably be annihilated. It’s happened before.

Though scientists used to think that all those dwarf galaxies orbiting the Milky Way were going to stick around for tens of billions of years, that might not be the case. “Most dwarf galaxies are star systems that arrived late in the Milky Way… in sharp contrast with a long-term satellite hypothesis,” an international team of researchers said in a study recently published in Monthly Notices of the Royal Astronomical Society.

Based on data from the European Space Agency’s Gaia mission, this study has found that many dwarf galaxies that were orbiting the Milky Way only a few billion years ago have ended up destroyed after being pulled in by our much more massive galaxy. It is possible dark matter has something to do with this.

Read 11 remaining paragraphs | Comments



Source: Ars Technica – The Milky Way will probably devour all the tiny galaxies that surround it

White House threatens to veto anti-EV bill just passed by US House

U.S. Capitol and the dome in Washington, DC

Enlarge (credit: L. Toshio Kishiyama/Getty Images)

The White House’s plan to boost electric vehicle adoption came under heavy fire in Congress on Wednesday. Five Democratic Representatives joined the Republican majority to pass a bill that would prohibit the US Environmental Protection Agency from enacting stricter new corporate average fuel efficiency regulations that would require automakers to sell many more EVs by the year 2032.

Its passage in the House follows a letter-writing campaign by some US auto dealers to get the White House to abandon its climate targets as the dealers say they find it too difficult to sell electric vehicles.

As Ars detailed at the time, the tougher new regulations will require automakers to sell four times as many zero-emission vehicles to meet the new fleet averages. If the rules go into effect, two-thirds of all new passenger cars and light trucks would have to be EVs by 2032.

Read 5 remaining paragraphs | Comments



Source: Ars Technica – White House threatens to veto anti-EV bill just passed by US House

MRI Machines Are Cool Tech But Don't Sneak A Gun Inside Or You Could End Up Butthurt

MRI Machines Are Cool Tech But Don't Sneak A Gun Inside Or You Could End Up Butthurt
A woman who went into a hospital for a supposedly routine Magnetic Resonance Imaging (MRI) exam got more than she bargained for. A handgun that she had snuck into the imaging room went off when the MRI fired a round into her buttocks, because, you know, magnets.

We understand that going to the hospital for examinations or procedures can

Source: Hot Hardware – MRI Machines Are Cool Tech But Don’t Sneak A Gun Inside Or You Could End Up Butthurt

Listen Up, Sennheiser Deals On Soundbars, Earbuds And Headphones Are Up To 44% Off

Listen Up, Sennheiser Deals On Soundbars, Earbuds And Headphones Are Up To 44% Off
Though Black Friday and Cyber Monday are long gone, there are still some stellar deals available as we approach the holidays at a terrifyingly blistering pace. Chief among these are audio peripherals from soundbars to earbuds and that which is in between, any of which could make for a great gift that will last a long time.

Leading off the

Source: Hot Hardware – Listen Up, Sennheiser Deals On Soundbars, Earbuds And Headphones Are Up To 44% Off

This Medium-rare Brisket Is a Sous Vide Miracle

To achieve a perfect brisket, you generally have had to cook it the heck out of it, at least enough to render out all the fat to make it tender. The result is delicious, but well-done. If you’re looking for a medium-rare solution with all the tenderness and silkiness of a normal brisket, sous vide is the answer. The best part is that the recipe is delightfully hands-off; the worst part is that from the time you read this recipe, you are at least 50 hours away from eating. It’s worth the wait.

Prep is blissfully simple

I’ve previously discussed how briskets are quite large and made up of two parts (the flat and the point), both of which are also quite large. However, most markets sell cross cuts that include a little of both, plus a hefty amount of fat that needs to be trimmed off. This recipe uses a 5-pound cut, but could adjust to any size cut that will fit into the sous vide bag. Regardless of what cut you go with, be sure to trim all the fat down to ¼ inch at most. 

Briskets need seasoning, and in particular, they benefit from some salt. The internet is full of complicated rubs and recipes for brisket, but I find za’atar to be a woefully underutilized choice. I liberally applied this spice mix of marjoram, thyme, cumin, coriander, sumac, salt, and sesame seed, all over the cuts of meat, using 6 or 7 tablespoons of it, and then sprinkled an additional 2 tablespoons of table salt over the meat as well. 

Occasionally top up the water bath

In many cases when sous viding meat, a sear at the start (or a reverse sear at the end) is required. We’re doing neither. Simply place the meat into the sous vide bag once it’s seasoned, set the temperature to 131°F and let it go for 50 hours. Check every 12 hours or so to ensure the water level is sufficient in the container you’re using. 

After 50 hours, take the brisket out and let the bag sit on the counter to rest for 20 minutes. At that point, remove the brisket from the bag and move it to a cutting board. Slice it to ¼-⅜ of an inch, on the bias.  Serve it with your favorite grainy mustard and some pickles; I used pickled green beans, but cornichons or pickled red onions would be perfect. 

Luxuriously silky and melt in your mouth

All brisket made well is tender, but this was the silkiest brisket I’ve ever had, and perfectly pink through and through. Melt-in-your-mouth is the phrase I kept thinking of, and it was all so very simple to make. It reheats beautifully, even in the microwave.

Sous vide brisket seasoned simply with flaky salt, served with grainy mustard, and pickled green beans and red onions
Sous vide brisket seasoned simply with flaky salt, served with grainy mustard, and pickled green beans and red onions
Credit: Amanda Blum

Sous Vide Za’atar Brisket Recipe

Ingredients:

  • 1 5-pound cut of brisket, well trimmed of fat (ask the butcher to do this if you prefer)

  • 6-8 tablespoons za’atar seasoning (or another seasoning mix you enjoy)

  • 2 tablespoons table salt

  1. Trim the brisket of all but ¼ inch of fat, if not already done. 

  2. Season the meat liberally with the seasoning and salt, rubbing it into all surfaces of the meat. 

  3. Place the meat in the sous vide bag, and then ensure all air is removed from the bag.

  4. Cook at 131°F for 50 hours, checking occasionally that the container has enough water. 

  5. Remove the bag from the water and let sit for 20 minutes. 

  6. Remove the meat and slice on the bias thinly. Serve with mustard and pickles.



Source: LifeHacker – This Medium-rare Brisket Is a Sous Vide Miracle

Meta Releases An AI Image Generator Trained On Your Instagram And Facebook Posts

Meta Releases An AI Image Generator Trained On Your Instagram And Facebook Posts
Meta is bringing improvements to the company’s Meta AI virtual assistant, which will be made available to users across all the apps Meta offers. Users will be able to interact with the upgraded AI by creating a new message and selecting “Create an AI chat.” It’s also possible to summon Meta AI in a group chat by typing “@MetaAI.” Someone with

Source: Hot Hardware – Meta Releases An AI Image Generator Trained On Your Instagram And Facebook Posts

Google Unveils Gemini, Its Massive AI Model And Biggest Threat To ChatGPT Yet

Google Unveils Gemini, Its Massive AI Model And Biggest Threat To ChatGPT Yet
Google introduced its most capable AI model yet, Gemini, as being the next step in its journey to make AI helpful for everyone. Gemini appears to be the most promising competitor to OpenAI’s ChatGPT.

Google and Alphabet CEO Sundar Pichai remarked in a Google blog post, “This is what excites me: the chance to make AI helpful for everyone,

Source: Hot Hardware – Google Unveils Gemini, Its Massive AI Model And Biggest Threat To ChatGPT Yet