Following discussions with upstream developers, LLVM is changing its versioning as part of the branch creation process to better distinguish mainline development builds of LLVM against those from stable (or soon to be stable) release branches…
Source: Phoronix – LLVM Moves To A Versioning Scheme Like GCC – N.1 Version For Stable Branch
Category Archives: Unfiltered RSS
Razer Wolverine V2 Controller Support Coming With Linux 6.7
With a set of input driver patches set to be merged today for the Linux 6.7-rc6 kernel, the XPad driver is adding support for Razer’s Wolverine V2 Xbox controller…
Source: Phoronix – Razer Wolverine V2 Controller Support Coming With Linux 6.7
KDE Developers Prepare For Christmas With More Bug Fixes & Qt 6 Porting
This week brought the second beta of KDE Plasma 6.0 along with KDE Gear and KDE Frameworks updates too. The holidays haven’t resulted in KDE development slowing down too much with still a number of bug fixes being merged this week and other minor enhancements…
Source: Phoronix – KDE Developers Prepare For Christmas With More Bug Fixes & Qt 6 Porting
Lab Wayland Compositor 0.7 Released – Ported To wlroots 0.17
Lab Wayland Compositor (labwc) is out with a new version ahead of Christmas for this wlroots-based window-stacking compositor that is inspired by the Openbox window manager…
Source: Phoronix – Lab Wayland Compositor 0.7 Released – Ported To wlroots 0.17
Vibrating Pill May Give Dieters a Feeling of Fullness, Study Suggests
Scientists have developed a vibrating pill that, when swallowed before eating, can create a feeling of fullness. The Guardian reports: The research, which has yet to be carried out in humans, shows that after 30 minutes of activity by the Vibes pill, pigs ate on average almost 40% less food in the following half hour than they did without the device, and gained weight more slowly. The Vibes name is an acronym derived from the pill’s full title — Vibrating Ingestible BioElectronic Stimulator. The work in pigs suggests the vibrations activate stretch receptors in the stomach, simulating the presence of food. This results in signals being sent to the hypothalamus in the brain via the vagus nerve, increasing levels of various hormones that give rise to a feeling of fullness and decreasing those that result in feelings of hunger.
“We envision the Vibes pill being ingested on a relatively empty stomach 20 to 30 min before anticipated meals to trigger the desired sensation of satiety early in the meal,â the team write, adding that when produced at scale, the cost of the pills is expected to be in the cents to one dollar range. The vibrations, which are powered by a battery encased in the swallowed capsule, can be triggered when stomach acid dissolves a membrane around the pill, or by a timer. The researchers say the pills, which are about the size of a large vitamin tablet, offer a non-invasive, temporary therapy, without the need for weight-loss surgery, and exit the body with other solid waste — meaning in humans they are flushed down the toilet. However they suggest it could be possible to develop pills that are implanted, or stay in the stomach, to reduce the need for people to repeatedly take them, should they require continuing therapy. Further reading: Man Reports PillCam Stuck In His Gut For Over 12 Weeks
Read more of this story at Slashdot.
Source: Slashdot – Vibrating Pill May Give Dieters a Feeling of Fullness, Study Suggests
Apple is reportedly looking to team up with news publishers to train its AI
Apple has been noticeably missing in the list of companies with their own generative AI product, but based on a new report by The New York Times, it’s looking to change that real soon. In recent weeks, Apple has reportedly started negotiating with major publishers and news organizations to ask for permission to use their content to train the generative AI system it’s developing. The company doesn’t expect to get its hands on their content for free, though, and The Times says it’s offering them multi-year deals worth at least $50 million for access to their news archives.
Apparently, some of the publishers it approached are concerned about the repercussions of letting Apple use their news articles throughout the years. They think a broad licensing deal for their archives could lead to legal issues along the way. The publishers are also concerned about the potential competition that may arise from Apple’s efforts.
That said, the iPhone-maker also reportedly built goodwill simply by asking them for permission and showing willingness to pay. The Times says the company’s higher-ups have been in discussion over where to get data for generative AI development for years now. Due to its commitment to privacy, they’ve been hesitating to use information collected from the internet.
Other companies with generative AIs of their own had been accused of stealing content and using it to train their products without express consent from creators and rights holders. OpenAI, for instance, is contending with several lawsuits that accuse it of using other people’s intellectual properties. One of those lawsuits was filed by novelists that include George R.R. Martin and John Grisham, while another was filed by nonfiction authors who said OpenAI and Microsoft have built a business “valued into the tens of billions of dollars by taking the combined works of humanity without permission.”
This article originally appeared on Engadget at https://www.engadget.com/apple-is-reportedly-looking-to-team-up-with-news-publishers-to-train-its-ai-074348010.html?src=rss
Source: Engadget – Apple is reportedly looking to team up with news publishers to train its AI
New AI Transistor Works Just Like the Human Brain
Longtime Slashdot reader FudRucker quotes a report from Study Finds: Researchers from Northwestern University, Boston College, and the Massachusetts Institute of Technology (MIT) have developed a new synaptic transistor that works just like the human brain. This advanced device, capable of both processing and storing information simultaneously, marks a notable shift from traditional machine-learning tasks to performing associative learning — similar to higher-level human cognition. This study introduces a device that operates effectively at room temperatures, a notable improvement over previous brain-like computing devices that required extremely cold conditions to keep their circuits from overheating. With its fast operation, low energy consumption, and ability to retain information without power, the new transistor is well-suited for real-world applications.
“The brain has a fundamentally different architecture than a digital computer,” says study co-author Mark Hersam, the Walter P. Murphy Professor of Materials Science and Engineering at Northwestern’s McCormick School of Engineering, in a university release. “In a digital computer, data move back and forth between a microprocessor and memory, which consumes a lot of energy and creates a bottleneck when attempting to perform multiple tasks at the same time. On the other hand, in the brain, memory and information processing are co-located and fully integrated, resulting in orders of magnitude higher energy efficiency. Our synaptic transistor similarly achieves concurrent memory and information processing functionality to more faithfully mimic the brain.”
Hersam and his team employed a novel strategy involving moire patterns, a type of geometric design formed when two patterns are overlaid. By stacking two-dimensional materials like bilayer graphene and hexagonal boron nitride and twisting them to form a moire pattern, they could manipulate the electronic properties of the graphene layers. This manipulation allowed for the creation of a synaptic transistor with enhanced neuromorphic functionality at room temperature. The device’s testing involved training it to recognize patterns and similarities, a form of associative learning. For instance, if trained to identify a pattern like “000,” the transistor could distinguish that “111” is more similar to “000” than “101,” demonstrating a higher level of cognitive function. This ability to process complex and imperfect inputs has significant implications for real-world AI applications, such as improving the reliability of self-driving vehicles in challenging conditions. The study has been published in the journal Nature.
Read more of this story at Slashdot.
Source: Slashdot – New AI Transistor Works Just Like the Human Brain
Autoconf 2.72 Released With C23 Support, New Year 2038 Safety Option
For those still relying on GNU Autoconf for generating configure scripts for building/installing/packaging software rather than more modern alternatives like CMake and Meson, Autoconf 2.72 is out today as a nice holiday treat…
Source: Phoronix – Autoconf 2.72 Released With C23 Support, New Year 2038 Safety Option
Psychologists Pinpoint Average Age Children Become Santa Sceptics
An anonymous reader quotes a report from The Guardian: From empty glasses of sherry on the mantelpiece to sooty footprints leading to the bedroom door, evidence of Santa’s existence is clearly irrefutable. Yet most children will begin to question it at some point — and many parents anticipate this moment with dread. Now psychologists have identified the average age when Santa skepticism creeps in, and which children are at greatest risk of harboring negative feelings when it does.
While most adults have fallen for the myth that Santa doesn’t exist, many children still believe — even if the idea of a single individual visiting the homes of billions of children in a single night is at odds with their wider reasoning skills. Dr Candice Mills, a psychologist at the University of Texas in Dallas, US, and a Santa sceptic, said: “Children typically begin to distinguish fantasy from reality during the preschool years, but their belief in the existence of a singular magical Santa Claus often continues into middle childhood.” […] To better understand this shift from belief to disbelief and children’s experiences of it, Mills and her colleagues interviewed 48 six- to 15-year-olds who had stopped believing in Santa and 44 of their parents, plus a further 383 adults.
The research, which has not yet been peer reviewed, found that for most children, disbelief crept in gradually about the age of eight — although some three- or four-year-olds had convinced themselves that Santa wasn’t real, while other children believed in him until they were 15 or 16. In many cases, it was testimony from other disbelievers that finally crushed their faith. Mills said: “They may have had some skepticism based on logical reasoning — like how can Santa Claus really get around the world in one night? — but what pushes them over the edge is a classmate at school saying he’s not real.”
Read more of this story at Slashdot.
Source: Slashdot – Psychologists Pinpoint Average Age Children Become Santa Sceptics
Today’s Wordle Hints (and Answer) for Saturday, December 23, 2023
If you’re looking for the Wordle answer for December 23, 2023 read on. We’ll share some clues, tips, and strategies, and finally the solution. Today’s puzzle is medium-ish difficulty; I got it on my third guess. Beware, there are spoilers below for December 23, Wordle #917! Keep scrolling if you want some hints (and then the answer) to today’s Wordle game.
How to play Wordle
Wordle lives here on the New York Times website. A new puzzle goes live every day at midnight, your local time.
Start by guessing a five-letter word. The letters of the word will turn green if they’re correct, yellow if you have the right letter in the wrong place, or gray if the letter isn’t in the day’s secret word at all. For more, check out our guide to playing Wordle here, and my strategy guide here for more advanced tips. (We also have more information at the bottom of this post, after the hints and answers.)
Ready for the hints? Let’s go!
Does today’s Wordle have any unusual letters?
We’ll define common letters as those that appear in the old typesetters’ phrase ETAOIN SHRDLU. (Memorize this! Pronounce it “Edwin Shirdloo,” like a name, and pretend he’s a friend of yours.)
We have four common letters today, and the remaining one is sort of medium-rare. Nothing at the end of the alphabet though.
Can you give me a hint for today’s Wordle?
It will make you think of skiing.
Does today’s Wordle have any double or repeated letters?
Nope, five different letters today.
How many vowels are in today’s Wordle?
There are two vowels in today’s word.
What letter does today’s Wordle start with?
Today’s word starts with S.
What letter does today’s Wordle end with?
Today’s word ends with E.
What is the solution to today’s Wordle?
Ready? Today’s word is SLOPE.
How I solved today’s Wordle
ARISE and TOUCH started me off, as usual, so I knew that there was an E at the end, and an S and O in there somewhere. STOVE and SNORE were out of contention. Hmm, let’s try SLOPE…yep, that’s it!
Wordle 917 3/6 ⬜⬜⬜🟨🟩 ⬜🟨⬜⬜⬜ 🟩🟩🟩🟩🟩
A primer on Wordle basics
The idea of Wordle is to guess the day’s secret word. When you first open the Wordle game, you’ll see an empty grid of letters. It’s up to you to make the first move: type in any five-letter word.
Now, you can use the colors that are revealed to get clues about the word:
-
Green means you correctly guessed a letter, and it’s in the correct position. (For example, if you guess PARTY, and the word is actually PURSE, the P and R will be green.)
-
Yellow means the letter is somewhere in the word, but not in the position you guessed it. (For example, if you guessed PARTY, but the word is actually ROAST, the R, A and T will all be yellow.)
-
Gray means the letter is not in the solution word at all. (If you guessed PARTY and everything is gray, then the solution cannot be PURSE or ROAST.)
With all that in mind, guess another word, and then another, trying to land on the correct word before you run out of chances. You get six guesses, and then it’s game over.
The best starter words for Wordle
What should you play for that first guess? The best starters tend to contain common letters, to increase the chances of getting yellow and green squares to guide your guessing. (And if you get all grays when guessing common letters, that’s still excellent information to help you rule out possibilities.) There isn’t a single “best” starting word, but the New York Times’s Wordle analysis bot has suggested starting with one of these:
-
CRANE
-
TRACE
-
SLANT
-
CRATE
-
CARTE
Meanwhile, an MIT analysis found that you’ll eliminate the most possibilities in the first round by starting with one of these:
-
SALET
-
REAST
-
TRACE
-
CRATE
-
SLATE
Other good picks might be ARISE or ROUND. Words like ADIEU and AUDIO get more vowels in play, but you could argue that it’s better to start with an emphasis on consonants, using a starter like RENTS or CLAMP. Choose your strategy, and see how it plays out.
How to win at Wordle
We have a few guides to Wordle strategy, which you might like to read over if you’re a serious student of the game. This one covers how to use consonants to your advantage, while this one focuses on a strategy that uses the most common letters. In this advanced guide, we detail a three-pronged approach for fishing for hints while maximizing your chances of winning quickly.
The biggest thing that separates Wordle winners from Wordle losers is that winners use their guesses to gather information about what letters are in the word. If you know that the word must end in -OUND, don’t waste four guesses on MOUND, ROUND, SOUND, and HOUND; combine those consonants and guess MARSH. If the H lights up in yellow, you know the solution.
One more note on strategy: the original Wordle used a list of about 2,300 solution words, but after the game was bought by the NYT, the game now has an editor who hand-picks the solutions. Sometimes they are slightly tricky words that wouldn’t have made the original list, and sometimes they are topical. For example, FEAST was the solution one Thanksgiving. So keep in mind that there may be a theme.
Wordle alternatives
If you can’t get enough of five-letter guessing games and their kin, the best Wordle alternatives, ranked by difficulty, include:
-
Dordle and Quordle, which ask you to play two (Dordle) or four (Quordle) puzzles at the same time, with the same guesses. There is also Octordle, with eight puzzles, and Sedecordle, with 16.
-
Waffle, which shows you several five-letter words, scrambled in a grid; you play by swapping the letters around until you solve.
-
Absurdle, which changes the solution after each guess, but needs to stay consistent with its previous feedback. You have to strategically back it into a corner until there is only one possible word left; then you guess it, and win.
-
Squabble, in which you play Wordle against other people with a timer running. You take damage if you spend too much time between guesses; winner is the last one standing.
-
Antiwordle, in which you are trying not to guess the day’s solution. You’re required to reuse any letters that you (oops) guessed correctly, so the longer it takes you, the better you are at the game.
Source: LifeHacker – Today’s Wordle Hints (and Answer) for Saturday, December 23, 2023
Today's NYT Connections Hints (and Answer) for Saturday, December 23, 2023
If you’re looking for the Connections answer for Saturday, December 23, 2023, read on—I’ll share some clues, tips, and strategies, and finally the solutions to all four categories. Along the way, I’ll explain the meanings of the trickier words and we’ll learn how everything fits together. Beware, there are spoilers below for December 23, NYT Connections #195! Read on if you want some hints (and then the answer) to today’s Connections game.
If you want an easy way to come back to our Connections hints every day, bookmark this page. You can also find our past hints there as well, in case you want to know what you missed in a previous puzzle.
Below, I’ll give you some oblique hints at today’s Connections answers. And farther down the page, I’ll reveal the themes and the answers. Scroll slowly and take just the hints you need!
Credit: Connections/NYT
Does today’s Connections game require any special knowledge?
Nope, not today.
Hints for the themes in today’s Connections puzzle
Here are some spoiler-free hints for the groupings in today’s Connections:
-
Yellow category – Ways of traveling.
-
Green category – Ready to join in.
-
Blue category – Just a smidge.
-
Purple category – This one is fruit flavored!
Does today’s Connections game involve any wordplay?
Yes, there’s a fill-in-the-blank for purple.
Ready to hear the answers? Keep scrolling if you want a little more help.
BEWARE: Spoilers follow for today’s Connections puzzle!
We’re about to give away some of the answers. Scroll slowly if you don’t want the whole thing spoiled. (The full solution is a bit further down.)
What are the ambiguous words in today’s Connections?
-
A RASP can be a type of file, or a description of a hoarse voice. But today it’s neither of those things; you’ll need to combine it with another word for the fill-in-the-blank category.
-
You can be ON BOARD a TRAIN or BOAT at the time of departure (“All aboard!”) but you can also be ON BOARD with a plan or scheme that’s about to go down.
-
GOOSE and DOWN don’t go together today, so don’t think too much about feather-stuffed pillows.
-
SPLASH and DASH do go together.
What are the categories in today’s Connections?
-
Yellow: MEANS OF TRANSPORTATION
-
Green: WILLING TO PARTICIPATE
-
Blue: LITTLE BIT, IN A RECIPE
-
Purple: ____BERRY
DOUBLE BEWARE: THE SOLUTION IS BELOW
Ready to learn the answers to today’s Connections puzzle? I give them all away below.
What are the yellow words in today’s Connections?
The yellow grouping is considered to be the most straightforward. The theme for today’s yellow group is MEANS OF TRANSPORTATION and the words are: BOAT, CAR, PLANE, TRAIN.
What are the green words in today’s Connections?
The green grouping is supposed to be the second-easiest. The theme for today’s green category is WILLING TO PARTICIPATE and the words are: DOWN, GAME, IN, ON BOARD.
What are the blue words in today’s Connections?
The blue grouping is the second-hardest. The theme for today’s blue category is LITTLE BIT, IN A RECIPE and the words are: DASH, DROP, PINCH, SPLASH.
What are the purple words in today’s Connections?
The purple grouping is considered to be the hardest. The theme for today’s purple category is ____BERRY and the words are: BLUE, GOOSE, RASP, STRAW.
How I solved today’s Connections
ON BOARD sounds like it refers to a boat or train, but then I realized it can also mean you’re IN on a plan. 🟩I got the recipe words next, 🟦then the means of transportation, 🟨 but I stared at RASP and friends for a good couple minutes without noticing that they are all berries. 🟪
Connections Puzzle #195 🟩🟩🟩🟩 🟦🟦🟦🟦 🟨🟨🟨🟨 🟪🟪🟪🟪
How to play Connections
I have a full guide to playing Connections, but here’s a refresher on the rules:
First, find the Connections game either on the New York Times website or in their Crossword app. You’ll see a game board with 16 tiles, each with one word or phrase. Your job is to select a group of four tiles that have something in common. Often they are all the same type of thing (for example: RAIN, SLEET, HAIL, and SNOW are all types of wet weather) but sometimes there is wordplay involved (for example, BUCKET, GUEST, TOP TEN, and WISH are all types of lists: bucket list, guest list, and so on).
Select four items and hit the Submit button. If you guessed correctly, the category and color will be revealed. (Yellow is easiest, followed by green, then blue, then purple.) If your guess was incorrect, you’ll get a chance to try again.
You win when you’ve correctly identified all four groups. But if you make four mistakes before you finish, the game ends and the answers are revealed.
How to win Connections
The most important thing to know to win Connections is that the groupings are designed to be tricky. Expect to see overlapping groups. For example, one puzzle seemed to include six breakfast foods: BACON, EGG, PANCAKE, OMELET, WAFFLE, and CEREAL. But BACON turned out to be part of a group of painters along with CLOSE, MUNCH, and WHISTLER, and EGG was in a group of things that come by the dozen (along with JUROR, ROSE, and MONTH). So don’t hit “submit” until you’ve confirmed that your group of four contains only those four things.
If you’re stuck, another strategy is to look at the words that seem to have no connection to the others. If all that comes to mind when you see WHISTLER is the painting nicknamed “Whistler’s Mother,” you might be on to something. When I solved that one, I ended up googling whether there was a painter named Close, because Close didn’t fit any of the obvious themes, either.
Another way to win when you’re stuck is, obviously, to read a few helpful hints–which is why we share these pointers every day. Check back tomorrow for the next puzzle!
Source: LifeHacker – Today’s NYT Connections Hints (and Answer) for Saturday, December 23, 2023
Apple Explores AI Deals With News Publishers
Apple is in negotiations with major news and publishing organizations (source paywalled; alternative source), “seeking permission to use their material in the company’s development of generative artificial intelligence systems,” reports the New York Times. From the report: The technology giant has floated multiyear deals worth at least $50 million to license the archives of news articles […]. The news organizations contacted by Apple include Conde Nast, publisher of Vogue and The New Yorker; NBC News; and IAC, which owns People, The Daily Beast and Better Homes and Gardens. The negotiations mark one of the earliest examples of how Apple is trying to catch up to rivals in the race to develop generative A.I., which allows computers to create images and chat like a human. […]
Some of the publishers contacted by Apple were lukewarm on the overture. After years of on-again-off-again commercial deals with tech companies like Meta, the owner of Facebook, publishers have grown wary of jumping into business with Silicon Valley. Several publishing executives were concerned that Apple’s terms were too expansive, according to three people familiar with the negotiations. The initial pitch covered broad licensing of publishers’ archives of published content, with publishers potentially on the hook for any legal liabilities that could stem from Apple’s use of their content.
Apple was also vague about how it intended to apply generative A.I. to the news industry, the people said, a potential competitive risk given Apple’s substantial audience for news on its devices. Still, some news executives were optimistic that Apple’s approach might eventually lead to a meaningful partnership. Two people familiar with the discussions struck a positive note on the long-term prospects of a deal, contrasting Apple’s approach of asking for permission with behavior from other artificial intelligence-enabled companies, which have been accused of seeking licensing deals with news organizations after they had already used their content to train generative models. Further reading: Apple’s AI Research Signals Ambition To Catch Up With Big Tech Rivals
Read more of this story at Slashdot.
Source: Slashdot – Apple Explores AI Deals With News Publishers
OpenAI In Talks To Raise New Funding At $100 Billion Valuation
According to Bloomberg (paywalled), OpenAI is in early talks to raise a fresh round of funding at a valuation at or above $100 billion. Reuters reports: The terms, valuation and timing of the funding round have not yet been finalized and could still change, the report added. OpenAI has also held discussions to raise funding for a new chip venture with Abu Dhabi-based G42, according to the report. If the valuation holds, the report notes that it would make OpenAI the second-most valuable U.S. startup behind Elon Musk’s SpaceX.
Read more of this story at Slashdot.
Source: Slashdot – OpenAI In Talks To Raise New Funding At 0 Billion Valuation
Microsoft President Brad Smith Quietly Leaves Board of Nonprofit Code.org
Longtime Slashdot reader theodp writes: Way back in September 2012, Microsoft President Brad Smith discussed the idea of “producing a crisis” to advance Microsoft’s “two-pronged” National Talent Strategy to increase K-12 CS education and the number of H-1B visas. Not long thereafter, the tech-backed nonprofit Code.org (which promotes and provides K-12 CS education and is led by Smith’s next-door neighbor) and Mark Zuckerberg’s FWD.us PAC (which lobbied for H-1B reform) were born, with Smith on board both. Over the past 10+ years, Smith has played a key role in establishing Code.org’s influence in the new K-12 CS education “grassroots” movement, including getting buy-in from three Presidential administrations — Obama, Trump, and Biden — as well as the U.S. Dept. of Education and the nation’s Governors. But after recent updates, Code.org’s Leadership page now indicates that Smith has quietly left Code.org’s Board of Directors and thanks him for his past help and advice. Since November (when archive.org indicates Smith’s photo was yanked from Code.org’s Leadership page), Smith has been in the news in conjunction with Microsoft’s relationship with another Microsoft-bankrolled nonprofit, OpenAI, which has come under scrutiny by the Feds and in the UK. Smith, who noted he and Microsoft helped OpenAI and CEO Sam Altman craft messaging ahead of a White House meeting, announced in a Dec. 8th tweet that Microsoft will be getting a non-voting OpenAI Board seat in connection with Altman’s return to power (who that non-voting Microsoft OpenAI board member will be has not been announced). OpenAI, Microsoft, and Code.org teamed up in December to provide K-12 CS+AI tutorials for this December’s AI-themed Hour of Code (the trio has also partnered with Amazon and Google on the Code.org-led TeachAI initiative). And while Smith has left Code.org’s Board, Microsoft’s influence there will live on as Microsoft CTO Kevin Scott — credited for forging Microsoft’s OpenAI partnership — remains a Code.org Board member together with execs from other Code.org Platinum Supporters ($3+ million in past 2 years) Google and Amazon.
Read more of this story at Slashdot.
Source: Slashdot – Microsoft President Brad Smith Quietly Leaves Board of Nonprofit Code.org
Read These Safety Tips Before Riding Your New E-bike
It’s estimated that a million e-bikes were sold in the United States in 2023, and the holidays have no doubt brought an army of excited new riders to the fold. If that’s you, congratulations on your new ride and hobby! But please read this before you ride off into the sunset. E-bikes are faster and heavier than normal bikes, making them more dangerous if you don’t know what you’re doing. The following tips will lessen your chances of breaking your fool neck on your new ride.
If you didn’t get an e-bike this year for Christmas, show Santa that you can take care of yourself by buying one these awesome e-bikes.
Suggested products
Five Ten Freerider DLX Mountain Bike Shoes
AstroAI Tire Inflator Portable Air Compressor Pump
Before you go on your first ride
Read the manual
Don’t take your first cruise around the neighborhood until you’ve read the manual. Most e-bike controls are easy to understand but some have unusual quirks, and it’s better to learn about them before you’re on the road.
Wear a helmet
The benefit of wearing a helmet in preventing serious head injuries during bike accidents is obvious, but it’s even more important to protect your brain if you’re riding an unfamiliar, motorized vehicle. All helmets are not the same, so make sure yours is solid, comfortable, and properly fitted. While any helmet is better than no helmet, the best solution is a helmet designed for the faster speeds of e-biking.
Wear the right shoes
When it comes to safety, your shoes are not nearly as important as your helmet, but they still matter. You could pick up a pair of stiff-soled shoes specifically made for biking, but for casual riding, you can get away with a pair of tennis shoes, as long as they fit snugly enough to stay on your feet and don’t have anything that winds around the pedals or chain—watch the laces. Never ride barefoot, in flip-flops, or in sandals. If you get more serious, a decent pair of mountain biking shoes and some good pedals will keep your feet in place while you ride.
Wear brightly colored clothing
Wear brightly colored clothing to stay as visible as possible to drivers and other bikers. Make sure nothing you have on can get entangled in the pedals or in the chain. Bike shorts aren’t mandatory, but they do a lot to keep your bum from hurting.
Install a mirror
I confess, I hate bike mirrors, but I recognize the wisdom of not having to take my eyes off the road to glance behind me.
Check your ride
Before you head out, check the following on your bike:
-
Tire pressure: Read the manual for proper PSI and pump ‘em up. A decent pump with a pressure gauge is mandatory.
-
Battery stability: Many e-bikes have removable batteries. Make sure they’re seated correctly and snapped into place.
-
Nuts and bolts: Before you ride a new bike, check that everything is securely affixed together. This is especially important if you bought it at a chain store, where it was likely assembled by someone with no special knowledge about bikes—but check even if your new bike came from a bike shop or arrived pre-built. You never know. Make sure the handlebars are securely in place, the brake rotors are seated correctly, the pedals screwed in all the way, and the saddle secured at the right height.
-
Check the brakes: Roll your bike forward and squeeze each brake lever to make sure they’re on-point.
-
Check the front wheel: Most bikes have easily removable front wheels—useful, but they can look OK at a casual glance, even though they’re not seated correctly. So get in there and give it a close inspection, and make sure the release skewer is tight enough while you’re at it.
-
Drop test: If everything seems good with your new ride, give it one more test: Lift it six inches or so off the ground and drop it. There shouldn’t be any alarming rattles or bangs, and nothing should shake loose.
Visit your local bike shop for an inspection
If you have any doubts about your new bike’s assembly (or your own ability to tell whether your bike is properly assembled) take it to your local bike shop and ask ‘em to take a look.
Find and use the speed limiter
It’s not usually advertised, but most e-bikes allow users to tinker with the top-speed to set their own speed limit. Until you know what you’re doing, it makes sense to dial it down a notch. Changing the speed limit on some e-bikes can be done in 30 seconds using an iPhone app, but for some bikes, it’s a fairly complex operation, so check the manual or the manufacturer’s website for instructions.
Plan your route
Before you head out on your first trip, plan where you’re going. Keep it to bike paths or roads with very few cars until you know what you’re doing. Don’t be like me on my first e-bike ride and end up having to make a left on a busy, five-way LA intersection on a bike I could barely control. Also: Make a longer route than you think you need: Riding an e-bike is stupid fun, and you’ll probably end up going farther than you planned.
Tips for staying safe on your first e-bike ride
Now that you’ve done your pre-ride inspection and planned a route, here are some on-the-road things to keep in mind.
Practice in a parking lot
Before you hit the road or bike path on your first e-bike ride, practice in an empty parking lot or other open, mellow spot. It takes a little time to get used to riding a powered bicycle, so start with no obstacles around, make some turns, test the brakes, and play around until you feel ready to hit a bike path.
Push it without power
Whenever I ride a new bike, I pedal it a little with no assist to get a feel for the weight and handling without the added torque. Then, I gradually go through the assist levels and gears to get an idea of how it will perform on the road.
Respect the throttle
If your new e-bike comes with a throttle, don’t use it until you feel somewhat comfortable with the pedal assist. And when you do, take it gradually. Throttles can deliver a “jolt” of power that can be alarming and result in a crash.
Start slowly
Once you’re headed out on the bike path, start slowly; only increase your speed when you’re confident and comfortable. Part of what makes e-bikes uniquely dangerous is that riders don’t have to “earn” their speed. If you’re moving at 28 mph on a regular bike, It’s because you’ve ridden a ton, and successfully controlled yourself at lower speeds first (or made a bad decision at the top of a hill). E-bikes don’t have that learning curve. A class 3 e-bike can reach 28mph without much effort, and an untrained rider going nearly 30 mph without proper respect for their velocity is a recipe for disaster.
Watch your weight
E-bikes are much heavier than analog bikes. Not only does this make mounting and dismounting them more difficult, it also adds to the momentum and changes the way they handle. Be aware of this and don’t take risks or try to ride your new, heavy bike like an Italian road bike.
Mind the brakes
Because e-bikes are heavier and faster than analog bikes, they almost all require disc brakes. These are far superior to caliper or coaster brakes of older bikes, but they take a little getting used to. Remember to brake earlier than you would on a non-electric bike to account for the longer stopping time.
Stay off the sidewalks
Most new bikers are leery of riding on the street—that’s where the cars are, after all—but riding on the sidewalk is almost always the more dangerous option, even though it can feel safer. Sidewalks are narrow and filled with obstacles. They’re more likely to be uneven, there’s no set traffic pattern, and no one expects you to be there. Streets, on the other hand, have rules. There are cars there, sure, but if bikers and drivers follow the rules, no one needs to get hurt.
Know your local bike laws
If you’re going to ride on streets with traffic, brush up on your local laws and rules regarding biking. In most places, e-bikes follow the same rules as pedal bikes, but not in all places.
Source: LifeHacker – Read These Safety Tips Before Riding Your New E-bike
Meet Kosmik, a Visual Canvas With Built-In PDF Reader and Web Browser
An anonymous reader quotes a report from TechCrunch: In recent years, tools such as Figma, TLDraw, Apple’s Freeform and Arc browser’s Easel functionality have tried to sell the idea of using an “infinite canvas” for capturing and sharing ideas. French startup Kosmik is building on that general concept with a knowledge-capturing tool that doesn’t require the user to switch between different windows or apps to capture information. Kosmik was founded in 2018 by Paul Rony and Christophe Van Deputte. Prior to that, Rony worked at a video production company as a junior director, and he wanted a single whiteboard-type canvas instead of file and folders where he could put videos, PDFs, websites, notes and drawings. And that’s when he started to build Kosmic, Rony told TechCrunch, drawing on a prior background in computing history and philosophy.
“It took us almost three years to make a working product to include baseline features like data encryption, offline-first mode and build a spatial canvas-based UI,” Rony explained. “We have built all of this on IPFS, so when two people collaborate everything is peer-to-peer rather than relying on a server-based architecture.” Kosmik offers an infinite canvas interface where you can insert text, images, videos, PDFs and links, which can be opened and previewed in a side panel. It also features a built-in browser, saving users from having to switch windows when they need to find a relevant website link. Additionally, the platform sports a PDF reader, which lets the user extract elements such as images and text.
The tool is useful for designers, architects, consultants, and students to build boards of information for different projects. The tool is useful for them as they don’t need to open up a bunch of Chrome tabs and put details into a document, which is not a very visual medium for various media types. Some retail investors are using the app to monitor stock prices and consultants are using them for their project boards. Available via the web, Mac, and Windows, Kosmik ships with a basic free tier, though this has a limit of 50MB of files and 5GB of storage with 500 canvas “elements.” For more storage and unlimited elements, the company offers a $5.99 monthly subscription, with plans in place to eventually offer a “pay-once” model for those who only want to use the software on a single device.
Read more of this story at Slashdot.
Source: Slashdot – Meet Kosmik, a Visual Canvas With Built-In PDF Reader and Web Browser
Microsoft Ending Support For Windows 10 Could Send 240 Million PCs To Landfills, Study Finds
According to Canalys Research, Microsoft’s plan to end support for Windows 10 could result in about 240 million computers being sent to landfills. “The electronic waste from these PCs could weigh an estimated 480 million kilograms, equivalent to 320,000 cars,” adds Reuters. From the report: While many PCs could remain functional for years post the end of OS support, Canalys warned demand for devices without security updates could be low. Microsoft announced a plan to provide security updates for Windows 10 devices until October 2028 for an undisclosed annual price. If the pricing structure for extended Windows 10 support mirrors past trends, migrating to newer PCs could be more cost-effective, increasing the number of older PCs heading to scrap, Canalys said.
Read more of this story at Slashdot.
Source: Slashdot – Microsoft Ending Support For Windows 10 Could Send 240 Million PCs To Landfills, Study Finds
Use ‘Household’ Automations to Make Your Google Home Even Smarter
Automations are really the best part of smart home hubs, and Google Home has one of the best automation engines out there. In the simplest terms, these automations allow you to set a trigger and a resulting action, like, “At 10 p.m., turn off the speakers,” or, “When I say, ‘let there be light,’ turn on all the household lights.”
If you’ve only set up personal routines, you probably thought the only option for triggers were the limited options offered around time, voice command, or location. These basic actions are great for most of your needs, but at some point, you likely found yourself wondering how to set up automations that were based around another home device condition. For instance, “When the TV turns on, turn off the reading lights.” The secret is using Google Home household routines instead of personal routines.
What triggers you can use with Google Home personal automations
Personal automations are a great way to get into basic routines and allow for four different criteria as a trigger for automations:
-
“When you use a specific phrase to Google Assistant”: You can set multiple options and variants for this, which is really useful. You should almost always set a verbal cue like this in addition to any other triggers, so you can run an automation on the fly if you need to.
-
“A specific time of day”: On whatever days of the week you choose.
-
“Sunrise or sunset”: You can offset this trigger by as much time before or after as you’d like. For example, “Run this routine three hours before sunrise on Monday, Wednesday, and Friday.”
-
“When you arrive or leave a specific location”: Google uses your phone’s location to determine this, which is most useful with home- and work-related automations.
How to use set up a Google Automation using a device condition as a trigger
By selecting “Household” routine instead of “Personal” routine when setting up a new automation, you are given an additional trigger possibility called “When a device does something.” If you click on that trigger condition and open it up, you should see every device connected to Google Home and a limited set of conditions related to each device. For instance, lights and plugs have “on” and “off” conditions, usually. Some lights might have dimness and color options as well. A thermostat or thermometer will likely have temperature as an option. Speakers might have volume as options. You can explore these options to set conditions that will trigger additional actions.
Set up an easy device trigger
I’ve read a number of arguments that a night light is the perfect example of an automation. Let’s say you have a motion or presence sensor in your hallway and a nightlight or dimmable light in that same hallway. You can now tell Google Home, “When the sensor senses someone, turn the hallway light on at 10%.” You can narrow it down to a time of day and specific days of the week. So, “When the sensor senses someone between the hours of 10 p.m. and 6 a.m., turn the hallway lights on at 10%,” which would stop Google Home from dimming your lights during the day.
Some rules to remember when setting up automations
This is a really powerful use of automations, but you have to keep in mind a few rules. It requires that all the devices in question are connected to Google Home, which means the device itself needs to have smart feature, or perhaps is connected to a smart plug. It also means that if you remove a device or it goes offline, the automation won’t work. Lastly, because these devices are powered by wifi and electricity, if your wifi goes down, the automations don’t run. That may not seem like a big deal, since lights can’t turn on without electricity anyway, but let me present a scenario: Let’s say I have a sump pump that’s powered by an automation and the wifi goes off for a period of time. That could be problematic and you couldn’t solve the problem with more smart tech (like a leak detector) since the problem is your wifi. All the while, water is still pooling but not being pumped out. These are important to keep in mind if you’re using automations while out of town, for instance.
All in all, automations are still a brilliant way to help make your life more efficient and comfortable and to make your home more accessible. Just keep in mind the technology’s limitations to avoid over-reliance.
Source: LifeHacker – Use ‘Household’ Automations to Make Your Google Home Even Smarter
Wine 9.0-rc3 Released With 35 Fixes In Total, Some Wayland Driver Fixes
The third weekly release candidate of Wine 9.0 is now available for this open-source software that allows running Windows games and applications on Linux and other platforms…
Source: Phoronix – Wine 9.0-rc3 Released With 35 Fixes In Total, Some Wayland Driver Fixes
Why You Should Consider a Death Doula
We’re all going to die, and before that, we will probably navigate the deaths of several people we love along the way.
Too dark? Discomfort with the idea of death may be the reason that people rarely talk about it, plan for it, or teach each other how to cope with it.
“Many people in our society are death phobic and do not want to talk about it,” said Marady Duran, a social worker, doula, and educator with the International End-of-Life Doula Association. “Being an end-of-life doula has been so much more than just my bedside experiences. I am able to talk with friends, family, and strangers about death and what scares them or what plans they have. Being a doula is also about educating our communities that there are many options for how end-of-life decisions can be made.”
When you or a loved one inevitably faces death, there can be an overwhelming feeling of What do I do now? What do I do with these feelings… and all this paperwork? End-of-life doulas (also called death doulas or death coaches) are compassionate and knowledgeable guides who can walk with you through death and grief.
The experience of supporting a childhood friend through her death at the age of 27 motivated Ashley Johnson, president of the National End-of-life Doula Alliance, to commit herself to this role.
“Walking alongside her during her journey, I recognized the tremendous need for education, service, and companionship for individuals and their families facing end-of-life challenges,” Johnson said. “The passing of my dear friend only solidified my commitment to this path. I saw it as my calling to extend the same level of care and support to others who were navigating the complexities of end-of-life experiences. I firmly believe that every individual deserves the dignity of a well-supported end-of-life journey, and that starts with demystifying the process, reducing fear, and helping families achieve the proper closure they need to heal.”
What to expect from a death doula
The services provided by an end-of-life doula are actually pretty varied and flexible. Much like birth doulas, they do not provide any medical care. These are some of the services Johnson said she provides in her work:
-
Advance health care planning. This might include a living will, setting up durable power of attorney for health care, and advance directive decisions. “We help individuals and their families navigate the complex process of advance healthcare planning, ensuring their wishes and choices are respected and documented,” Johnson said.
-
Practical training for family caregivers. End-of-life doulas can teach caretakers and family members how to physically care for their loved ones as they near death.
-
Companionship to patients. “We provide emotional support and companionship to patients, helping to ease their feelings of isolation and anxiety,” Johnson said.
-
Relief for family caregivers. Caring for a dying family member can be relentless, but caregivers need time to step away and care for themselves too.
-
Creating a plan for support at the patient’s time of death. A person nearing the end of their life may be comforted by many things in their environment, from the lighting, music, aromatherapy, and who’s present. A doula can help coordinate all the details.
-
Grief support. “Our role extends into the grieving process, offering support to both the dying person’s loved ones and the patient during the end-of-life journey and beyond,” Johnson said.
-
Vigil presence for actively dying patients. “We ensure that no one faces the end of life alone by being a comforting and compassionate presence during the active dying process,”Johnson said.
-
Help with planning funeral and memorial services. Planning services is a complicated task to tackle while you are likely exhausted with grief. Doulas have been through this process many times and can be a steady hand while you make decisions.
“Our aim as death doulas is to enhance the quality of life and death for all involved,” Johnson said. “We provide a range of non-medical support, fostering an environment where individuals and their loved ones can find comfort, guidance, and a sense of peace during this profound and delicate phase of life.”
When is it time to bring in a doula?
Death doulas can provide comfort and support to both the dying person and their loved ones at any stage of the process. They can step in to help before, during, or after a death.
-
At any time, before you even receive a terminal diagnosis, doulas can help you prepare emotionally and practically with planning for end-of-life wishes, advance care planning, and creating a supportive environment.
-
During the end-of-life phase, doulas are more present to offer emotional, spiritual and practical support. They may be available weekly or daily, as needed.
-
After death, doula services continue for the family of the deceased.
“There really is no timeline for grief,” Duran said. “Some will want to meet one or two times after the death, and some do not want to do grief work at all. It is a personal journey, and some people may take years to do the work.”
Support for an unexpected death
Not all deaths come with an advanced warning or time to prepare and plan. Even in the case of an unexpected death, an end-of-life doula can help you handle practical details and process grief. They can:
-
Provide emotional support
-
Help you understand the grief process
-
Teach you coping strategies
-
Help with arrangements, legal, and financial matters
-
Help you create meaningful memorial rituals to honor the deceased
-
Provide connection and community
-
Listen and validate your feelings
-
Provide long-term support
“My mentor Ocean Phillips, who is also a doula, always reminds me that ‘grief is another form of love,’” Duran said. “Grief gets a bad rap, and many people do not want to feel grief, but it can be transformative for many who experience it. People who go through an unexpected death of a loved one may feel guilt—‘If only I…I could have…’ The doula can hold space for them and allow them to share that. We can never fix or change, but we can stand with them and provide loving kindness along the way.”
Other professionals to help you navigate a death
Death doulas work in conjunction with many other professionals, including healthcare workers and hospice staff, to help families go through the process of death and all that follows.
“The whole team has a piece in being able to connect with those navigating grief and death. I always recognize that I am just one small part of the larger community that will help support those facing death and loss,” Duran said.
These are a few other professionals you might want to reach out to when facing the death of a loved one:
-
Chaplain
-
Community leaders
-
Estate planning lawyer
-
Funeral service professional
-
Financial planner
-
Tax accountant (to help you file on behalf of the deceased and the estate)
Source: LifeHacker – Why You Should Consider a Death Doula