DARPA must have gotten super into Megalopolis.
DARPA must have gotten super into Megalopolis.
On Thursday, Inception Labs released Mercury Coder, a new AI language model that uses diffusion techniques to generate text faster than conventional models. Unlike traditional models that create text word by word—such as the kind that powers ChatGPT—diffusion-based models like Mercury produce entire responses simultaneously, refining them from an initially masked state into coherent text.
Traditional large language models build text from left to right, one token at a time. They use a technique called “autoregression.” Each word must wait for all previous words before appearing. Inspired by techniques from image-generation models like Stable Diffusion, DALL-E, and Midjourney, text diffusion language models like LLaDA (developed by researchers from Renmin University and Ant Group) and Mercury use a masking-based approach. These models begin with fully obscured content and gradually “denoise” the output, revealing all parts of the response at once.
While image diffusion models add continuous noise to pixel values, text diffusion models can’t apply continuous noise to discrete tokens (chunks of text data). Instead, they replace tokens with special mask tokens as the text equivalent of noise. In LLaDA, the masking probability controls the noise level, with high masking representing high noise and low masking representing low noise. The diffusion process moves from high noise to low noise. Though LLaDA describes this using masking terminology and Mercury uses noise terminology, both apply a similar concept to text generation rooted in diffusion.
In a fitting crossover, Roblox is getting a big speed boost on Chromebooks. Google said on Thursday that a new x86 version of the online game platform and creation system is twice as fast as the Android version, which was previously the only way to play Roblox on ChromeOS.
Given the overlap between Chromebooks (popular in education) and Roblox (popular with kids, for better or worse), a better-performing version on ChromeOS seems like a good match. Although there are more ARM-based Chromebooks than before, most still use x86 architecture.
Google says the new Roblox build provides smoother gameplay, quicker load times and “an overall better Roblox experience.” More specifically, you should see a 99 percent framerate increase in the virtual pet game Adopt Me! and a 67 percent boost in the role-playing sim Brookhaven RP. Load times are up to 29 percent faster when going from a fresh start to the login page.
Alongside the x86 launch, Google and Roblox have some speed-themed in-game swag for Chromebook users. You can redeem a jetpack with a Chrome logo (of course!) for your avatar to fly around like a Google-sponsored Buzz Lightyear. You can also redeem a “hoverboard” (which looks suspiciously like a OneWheel) for faster ground travel. You’ll find both on Google’s perks page.
This isn’t the first mashup between the two companies. Last year, they teamed up on a weird game that teaches kids about online safety, the, uh, “interestingly” named Be Internet Awesome World.
Google told Engadget that you can install the x86 version of Roblox directly through the Play Store. Although that’s typically where you find the Android version, the storefront should automatically deliver the right build for your laptop.
This article originally appeared on Engadget at https://www.engadget.com/gaming/roblox-is-now-much-faster-on-chromebooks-210030799.html?src=rss
Obsidian is the Winamp of productivity tools. If you’re as ancient as I am, you might remember that the best part of that once-ubiquitous music player extension was the massive number of plugins and themes you could install to make it better, all of them built by enthusiasts.
Obsidian is a good note-taking application on its own, stuffed with all kinds of features: You can organize notes in folders, link to notes from other notes, and even use advanced options like Mermaid diagrams. But like Winamp, Obsidian truly shines once you dig into its extensive plugin ecosystem. There are over 2,000 Obsidian plugins available as of this writing, and you can use them to basically turn Obsidian into whatever you can dream up.
Many of these plugins are small in scope, granted, but not all of them. Some of the extensions are extensive enough to replace entire applications you might otherwise be using. Here’s how I used Obsidian plugins to replace four different productivity tools.
I used to be a big fan of Trello, once a humble personal kanban planner. Fifteen years of bloat and upselling mean that application is unrecognizable today, which I’m fine with, because Obsidian works better for me than Trello ever did. I owe it all to the Obsidian Kanban plugin.
Install it, and you can create as many Kanban boards in Obsidian as you like. Every card can include as much text as you want, formatted the same way you would anything else in Obsidian. That includes links—every card can link to the pages you’re using to manage your projects.
I’m a freelance journalist who writes for a handful of publications, including the one you’re reading now. I typically write around 20 articles a month, meaning I always have multiple projects on the go. I use an Obsidian Kanban board to keep track of everything. I have columns for “Plan to write this month,” “Plan to write this week,” “Outlined,” “Submitted need edits,” “Edited not invoiced,” “Invoiced not paid,” and, finally, “Paid.” This system allows me to see everything I’m working one in one place, and track my progress on all of them. I honestly don’t know if I could manage my workflow without it. And, because I also do all of my writing directly in Obsidian, I can jump straight to a project from my dashboard.
This is just one example—I’m sure you can think of other uses. But perhaps my favorite part of this system is that every kanban board in Obsidian is, in reality, just a markdown document that combines a few lists, meaning I can export them and keep an archive, even if I stop using Obsidian.
Lifehacker has written a lot about journalling apps over the years, and I personally have extensively tested every example you can think of, multiple times. All of them have pros and cons, and I’m not going to pretend that Obsidian is the best tool for everyone. What I will say is that I use Obsidian for my personal journal, and I can’t imagine using anything else.
My colleague Kamosh has already written about using Obsidian as a journalling app, so I’ll refer you to him for more on how to get started. But I’ll add that I recommend installing the journal review plugin so that you can regularly look back at previous entries. You can also look into Obsidian’s templates feature if you want to use the same outline for your journal every day. I used it to create something similar to a bullet-journal, with questions about my day.
A few months ago, Obsidian launched Obsidian Clipper, which saves webpages to your personal “vault.” This is an extension for every major browser that allows you to save entire articles from the web. This is useful for research, but it also means you can use Obsidian as a replacement for read-it-later applications like Pocket or Instapaper. Just set up a dedicated vault for articles you want to read later, point the plugin toward that vault, and open your read-it-later vault every time you want to catch up on your backlog. You can even do things like highlight or add your own notes while you read, all without having to pay for a subscription.
The problem with many to-do apps—and the reason Lifehacker will seemingly never stop writing about them—is that everyone has different productivity needs and no single app can serve them all. If you have never found a to-do system that’s perfect for you, that’s understandable.
But if that’s you, and you’re a fan of Obsidian generally, look into the tasks plugin. This tool goes through every single note in your vault and collects all of the markdown task lists you’ve created. It’s a perfect add-on if you already use Obsidian to outline your projects. The extension also allows you to add due dates, including recurring tasks, and set your priorities.
Google’s Pixel phones include numerous thoughtful features you don’t get on other phones, like Now Playing. This feature can identify background music from the lock screen, but unlike some similar song identifiers, it works even without an Internet connection. Sadly, it has been broken for months. There is some hope, though. Google has indicated that a fix is ready for deployment, and Pixel users can expect to see it in a future OS update.
First introduced in 2017, Now Playing uses a cache of thousands of audio fingerprints to identify songs you might encounter in your daily grind. Since it works offline, it’s highly efficient and preserves your privacy. Now Playing isn’t a life-changing addition to the mobile experience, but it’s damn cool.
That makes it all the stranger that Google appears to have broken Now Playing with the release of Android 15 (or possibly a Play Services update around the same time) and has left it that way for months. Before that update, Now Playing would regularly list songs on the lock screen and offer enhanced search for songs it couldn’t ID offline. It was obvious to Pixel fans when Now Playing stopped listening last year, and despite a large volume of online complaints, Google has seemingly dragged its feet.
At some point in 2025, Twitch plans to offer monetization tools like subscriptions and Bits for all streamers, according to an open letter from Twitch CEO Dan Clancy. Monetizing Twitch streams previously required reaching “Affiliate” status on the platform.
Having viewers subscribe to a Twitch channel or cheer with Bits (Twitch’s digital currency) during a stream are the two most prominent ways the average streamer can make money from their streams, outside of passive ad revenue or sponsorships. Currently, each subscription earns you a 50/50 split on subscription revenue after processing fees and taxes, while each Bit earned during a stream translates to around $0.01.
Opening up subscriptions and Bits to “most streamers, from day one,” should serve to make streaming on Twitch more enticing to anyone worried about the long process of becoming a Twitch Affiliate or Partner. Reaching either status on Twitch requires earning a certain amount of followers and streaming a certain amount of hours, on top of other criteria. With at least some monetization tools becoming available to everyone, climbing Twitch’s ladder seems like it could become more about unlocking access to tools rather than the ability to earn money at all. (Thought novice streamers should keep in mind they must get a minimum of $50 to withdraw their earnings from Twitch at all.)
Alongside these changes, Clancy also announced that Twitch will introduce more ways for streamers to earn money together, new editing tools for creating clips of streams and expanded moderation tools on mobile. Twitch’s has been rethinking its approach to moderation and policy violations over the last few months. Earlier in February, the company tweaked how it enforces community guideline violations, making it so violations can “expire” after a certain amount of time.
This article originally appeared on Engadget at https://www.engadget.com/entertainment/streaming/twitch-will-open-some-monetization-tools-to-even-first-time-streamers-204805004.html?src=rss
Subtle, this movie is not—have you seen Jason Momoa’s ‘ironic’ wig, for instance? The movie arrives April 4.
Over 300 indie creators have pooled their games to create the California Fire Relief Bundle on itch.io to get funds into the hands of survivors of the recent devastating wildfires in Southern California. You can help a great cause and play some incredible games for just $10.
We may earn a commission from links on this page. Deal pricing and availability subject to change after time of publication.
GoPro is the indisputable king of small outdoor action cameras. Its latest flagship camera, the GoPro Hero13 Black came out this past September, but the older GoPro Hero12 (released in 2023) has a good bundle deal you should consider. The Black Creator Edition bundle offers the Volta pack, a media and light mod, extra battery, and carrying case all for just $55 more than the camera alone. You can get the bundle for $399 (originally $499), its lowest price yet, according to price-tracking tools.
GoPro releases a new camera just about every year, so the changes aren’t always ground-breaking. There’s not much you can do with just a GoPro, since they heavily rely on their accessories, so the bundles are usually where the best offers are. That’s what makes the GoPro HERO12 Black Creator Edition a great deal in 2025. Here is what you get: HERO12 Black, Carrying Case, Enduro Battery, Curved Adhesive Mount, Mounting Buckle + Thumb Screw, USB-C Cable, Volta, USB-C Pass-Through Door, Lanyard, Media Mod, Vertical Mounting Buckle, Light Mod, Light Diffuser, and 2-Finger Adapter.
The Volta handle is arguably the most valuable item. The handle is a portable battery, has built-in buttons for easier control, lets you use the GoPro wirelessly with a remote, and doubles as a tripod. The media mod and light mod also offer useful tools, giving you a microphone with audio ports and an LED light so you can see better in the dark.
The GoPro Hero 12 Black received an “outstanding” review from PCMag upon its 2023 release, and the bundle is almost the same price as the GoPro Hero 13 Black, so it makes it a great deal for anyone looking to get a good GoPro with all the important accessories at a discounted price.
Forza Horizon 5, which launched over four years ago on Xbox and PC, is making the leap to PlayStation 5 soon, but because it’s 2025, the game will lock “early access” to Xbox’s open-world driving sim behind a pricey special edition. It’s the next evolution in publishers holding games hostage for extra money.
Initially available as a “research preview,” access is limited to software developers and users who pay $200 monthly for ChatGPT Pro subscriptions. The company plans to gather feedback before wider distribution. According to OpenAI’s blog post, GPT-4.5 will be the company’s last model that doesn’t use additional computing power to analyze queries before responding. Future releases will incorporate the reasoning approach already used in its newer models like o1 and o3.
Read more of this story at Slashdot.
Amazon announced that it has created its own quantum computing chip, joining Microsoft and Google in a push to take this potentially transformative technology from the theoretical to the practical. Ocelot is a prototype that’s intended to test the effectiveness of Amazon Web Services’ quantum error correction architecture. Compared with other chip methods, the company claims Ocelot can reduce the cost of implementing quantum error correction by up to 90 percent.
Quantum computing could solve complicated problems exponentially faster than standard computers by using quantum bits, or qubits, rather than traditional bits that store a computer’s information as 1s and 0s. Rather than representing only a 1 or a 0, qubits can represent a proportion of both 1 and 0 at the same time. Ocelot takes this a step farther with its use of “cat qubits,” named for the famous Schrödinger’s cat thought experiment, which can “intrinsically suppress certain forms of errors,” according to Amazon.
Error rate is one of the key limitations of current quantum computing, because the qubits are so sensitive to minute changes in their environments. Electromagnetic interference from a WiFi network can be enough to disturb a qubit and cause it to make mistakes. Adding more qubits to a chip means faster calculations, but also more mistakes.
Ocelot consists of five data qubits (the cat qubits), five “buffer circuits” to stabilize them and four qubits for detecting errors on the cat qubits. “We selected our qubit and architecture with quantum error correction as the top requirement,” said Oskar Painter, director of quantum hardware at AWS. “We believe that if we’re going to make practical quantum computers, quantum error correction needs to come first.”
Google claimed that its Willow chip, announced in December, was able to reduce errors as more qubits were added. Ocelot is another step toward reducing errors and making useful quantum computers a reality.
This article originally appeared on Engadget at https://www.engadget.com/computing/amazon-joins-the-quantum-computing-race-with-a-chip-designed-for-error-correction-201501075.html?src=rss
After a year of waiting, we finally got our first look at Pokémon Legends: Z-A during the annual Pokémon Presents showcase. The Switch game seems like a significant departure from the untamed open zones of Pokémon Legends: Arceus, which is exciting because we don’t know what to expect. The stream gave us a trailer as…
The Dune and Spider-Man star has joined the upcoming sequel as Shrek’s daughter, Princess Felicia.
Your keyboard is one of the few pieces of technology you’ll use for hours at a time, so why not make it something that brings you joy? Sure, the people who gush over mechanical keyboards can be a bit much, but the enhanced comfort, durability and customizability that comes with the best of them is real. If you’re interested in making the switch (ahem), we’ve tested dozens of mechanical keyboards over the past year and rounded up our favorites below. We’ve also broken down what to look for as you shop.
The first thing to decide with any keyboard is what size and layout you want. Full-size layouts have all the keys you’d ever need — a number pad, a full function row, arrow keys, etc. — but they also have the largest physical footprint. A 96-percent or “1800” keyboard is similar, but crunches the navigation cluster (Page Up, Home, etc.), numpad and arrow keys closer together to save space. Tenkeyless (TKL) or 80-percent keyboards omit the number pad entirely; they’re often considered the best blend of size and functionality. 75-percent keyboards keep almost all of the buttons of a TKL model but further reduce any “dead” space between them — think of them like the TKL versions of a 96 percent layout.
It gets more and more minimal from there. The smallest popular layout is the 60 percent keyboard, which removes the arrow keys, function row, numpad and navigation cluster. This kind of design can be particularly useful for gaming, as it opens up a ton of desk space to swing your mouse around. It typically relies on shortcuts to make up for its missing keys, but it comes with a learning curve as a result.
Even more compact options exist beyond that. These can be adorable, but they usually involve removing the number row, which is a step too far for most people. There are all sorts of ergonomic keyboards that utilize different shapes to improve your wrist and arm comfort as well, but we have a separate guide for those.
No component has more of an impact on how a mechanical keyboard feels and sounds than the switches beneath its keycaps. The market for these tiny mechanisms is vast and complex but, to keep it simple, you can separate them into three types: linear, tactile and clicky. Which you prefer ultimately comes down to personal preference, so we encourage you to go to a store, try out a friend’s keyboard and test switches out to determine what you like best.
Linear switches feel smooth and consistent all the way down. Many PC gamers prefer them because they’re often light and fast to actuate, so they can register inputs quickly. They tend to be quieter than other switch types as well, but some may find them too sensitive.
Tactile switches create a noticeable “bump” partway through a press. They generally aren’t as fast as their linear counterparts, but many (including yours truly) enjoy the tangible sense of feedback they provide with each keystroke. This bit of resistance can make it a little easier to avoid typos, too. Many tactile switches are neither outright quiet nor disruptively loud.
Clicky switches are, well, clicky. They work similarly to tactile switches but use an extra mechanism that makes a sharp click sound when pressed. The exact design of that mechanism can differ depending on the switch. Some people love the audible feedback of clicky switches. The people who work or live with them? Probably not so much.
Remember: These are general buckets. Within them lies an enormous variety of switches with differing actuation points, weights, springs, bump sensations and more. One linear, tactile, or clicky switch can feel and sound noticeably different than another.
There are more dramatic variations as well. Low-profile switches, for one, can be linear, tactile or clicky but aren’t as tall and have a shorter travel distance. They allow for flatter and more compact designs, with keys that are fast to press but also easy to bottom out.
Optical and Hall effect switches rely on different mechanisms entirely. Instead of a physical contact point, the former uses a beam of infrared light to register keystrokes, while the latter uses tiny magnets. Both commonly have a linear feel. They can also enable a few gaming-friendly features: You could set custom actuation points and make any key more or less sensitive, map multiple actions to one keystroke or even use an “analog mode” that emulates gamepad controls. (Newer inductive switches are said to offer similar benefits.) These are niche tricks, but they can make a difference for competitive-minded players. Boards that use these “analog” switches are frequently more expensive and less customizable than traditional mechanical options, though.
It doesn’t stop at switch types: Manufacturers (and you!) can make several other tweaks to shape how a mechanical keyboard feels and sounds. Some have layers of different foam inside their case to tamp down noise, for instance. Some have switches that are lubricated out of the box to provide a smoother feel and more muted sound. A few others put plastic, rubber or foam “films” between the upper and bottom housing of a switch to keep it from wobbling and further tune its acoustics. Or they stick a layer of tape on their printed circuit board (PCB) to absorb higher-pitched sounds. We think most people will find that some well-applied foam and lubing makes things feel nicer, though this is another matter that comes down to taste.
Keycaps play a huge role in defining a keyboard’s character. First off, they should look nice! There’s a huge market for third-party keycaps in all different styles, from the playful to the professional to the proudly impractical. The majority of mechanical keyboards make it easy to swap in new keycaps, so it’s usually not a huge deal if you ever get bored with your device’s stock set.
Most keycaps are made from one of two types of plastic: ABS (acrylonitrile butadiene styrene) or PBT (polybutylene terephthalate). Keycaps using the latter tend to be higher-quality. They’re often thicker, more durable, deeper-sounding and less prone to developing a shiny or greasy finish over time. Still, premium ABS keycaps do exist, so this is another case where what’s “best” partly comes down to personal taste. You may prefer an ABS keycap that feels smooth over a PBT model with a rougher texture.
Keycap sets are available in several different shapes and sizes. Some are totally uniform; many others are distinctly sculpted to meet your fingers in (ostensibly) more natural positions. Which is most comfortable is something you’ll have to figure out for yourself. You can check out keycaps.info to see what the most popular keycap profiles look like.
Keyboard makers have several different methods of printing the letters and symbols (aka “legends”) that go on a set of keycaps. The two most common are known as double-shot and dye-sublimation. Double-shot caps are typically more durable but cost more to produce — they’re made by molding one color of plastic for the keycap around a second color of plastic for the legend. “Dye-sub” caps, in contrast, use heat to stain in the legends but are decently durable in their own right.
For keyboards with RGB backlighting, it’s best if the legends to be “shine-through,” so those color effects are visible through the keycaps. We don’t think it’s the end of the world if they aren’t — as you’ll see below — but the RGB won’t be as fun otherwise.
Stabilizers (or “stabs”) are little components that go under large keys like the space bar or backspace to keep them from rattling or wobbling when pressed. These come in different types as well. Many a decent keyboard has been hindered by subpar stabilizers, so it’s worth checking your bigger keys first to ensure they aren’t distractingly shaky or uneven.
A keyboard’s mounting style determines how its PCB and plate — i.e., a common (but not universal) layer that holds the keycaps in place above the PCB — are secured within its case. This, too, comes in varying styles and can have a significant effect on how the board feels and sounds. It’s also something that’s best explained visually, so we’ll point you to this excellent infographic from Thomas Baart instead of running through every possible configuration here. It’s hard to say one mounting style is always better than the others, but many enthusiast boards these days use some sort of gasket mount, which puts a gasket material on either side to separate the plate from the main case. Done well, this can make typing feel softer and bouncier than it would on a more traditional, tray-mounted design.
Regardless of what’s going on under the hood, a good keyboard shouldn’t feel cheap on the outside, either. Its case shouldn’t flex under pressure or feel hollow as you’re clacking away. Higher-end models often have cases made from metal or sturdier plastic — the former may feel more premium but it’s typically heavier and pricier.
We focused on pre-built models here, but that doesn’t mean customization isn’t important. Experimenting with different switches and keycaps is half the fun of this hobby, after all. For this guide, we prioritized keyboards that are “hot-swappable,” which means they let you easily remove and replace switches without having to desolder anything. Permanently attached switches may be more stable, but fixing a broken hot-swappable switch should be relatively painless — and more affordable to boot.
We also valued keyboards that are easy to program and customize through software, whether it’s a manufacturer-specific app or popular open-source programs like VIA. Not everyone will go through the trouble to set macros, customize backlighting or remap keys, but it’s better to have the option if your mindset changes down the road.
It’s a plus if a keyboard works across multiple operating systems, particularly Windows and macOS, just in case you ever switch allegiances. If the device comes with OS-specific keycaps you can pop on to make the experience less clunky, that’s even better.
Wireless connectivity isn’t essential with a device that mostly sits on your desk, but it’s always nice to cut down on cables. Though wireless keyboards still cost more than wired ones, today you can get something great for less than $100. If you do go wireless, look for a model that can connect over Bluetooth and a USB wireless dongle. The former is convenient for travel, while the latter can provide a more stable connection. For wired keyboards, you want a detachable USB cable so you don’t have to replace your entire device if the cord ever frays or breaks.
Good backlighting will make any keyboard easier to use in the dark. We gave bonus points to keyboards with fully programmable RGB lights, as they can be particularly fun to mess with, but they’re not essential. As noted above, the strength of your backlight will be neutered if your keycaps’ legends aren’t transparent.
Some mechanical keyboards come configured with a rotary knob, which typically controls volume by default but can be customized to control other inputs as well. This is more of a fun bonus than anything else, but we found it hard to give up on devices without one.
To be clear, there isn’t one “best” mechanical keyboard for everyone. Yes, some are likely to be better for most people than others; that’s what we set out to find with this guide. But ultimately, this is one of those categories that’ll largely depend on your personal tastes.
It’s also worth reiterating that we only considered pre-built models for this guide. We still valued keyboards that are configurable with different switches, keycaps and other design tweaks upfront and easy to customize after purchase. However, we recognize that many people just want to pay for a nice thing and enjoy it, without having to do homework on how they can make it better. If you want to get hardcore later on and start building your own custom keyboards, we have a whole separate guide for that.
With that said, we started our research by reading a ton of reviews from both professionals and everyday users, trawling enthusiast forums along the way. This helped us whittle down the devices that had a shot of being a top pick and were readily available from reputable brands. From there, we used each keyboard as our daily driver for a few days, typing up thousands of words, playing PC games and paying attention to the key aspects noted above. We fully charged each wireless model and monitored its battery drain to ensure it lined up with their advertised rating. We also ensured any companion software worked as intended.
It’s worth keeping in mind that new mechanical keyboards are coming out all the time. It’s very difficult to get to everything, but we’ll continue to monitor the market and update this guide as noteworthy boards arrive.
The wireless Lofree Block feels great and has a fun retro aesthetic that looks like it belongs next to an old Mac. Its keys are wonderfully smooth to the touch and create a nice thocky tone. At $169, it’s a good middle ground between the Keychron Q Max and V Max series if you dig the look. However, it doesn’t have any software for programming macros, it only has a white backlight and it only comes in a full-size layout. Are those huge issues? No. But there are fine margins separating these things once you get to a certain point.
It’s a similar story with the Lofree Flow, a low-profile model. Its full-POM switches are softer and noticeably quieter than the NuPhy Air V2, and its thin aluminum case looks and feels high-quality. It can only work wirelessly using Bluetooth, though, and we noticed a couple of connection hiccups in testing. There’s still no software, either, plus its backlight is fairly weak. It also costs $40 or so more than the Air75 V2. Still, it’s a great alternative.
The low-profile Keychron K Max series has all the requisite features and costs less than the NuPhy Air75 V2 and Lofree Flow. If you don’t like the Air V2’s style and want a cheaper low-profile model, it’s worth a look. That said, the keycaps on NuPhy’s board feel a bit higher-quality, and the tactile Gateron switches in our K Max unit sound thinner.
The full-size NZXT Function 2 and tenkeyless NZXT Function 2 MiniTKL are perfectly solid gaming keyboards with fast optical switches, durable PBT keycaps, tasteful RGB lighting, sound-dampening foam and aluminum top plates. They support a fair amount of customization through NZXT’s CAM app, including the ability to swap between two different universal actuation settings. The stabilizers on larger keys exhibit some rattle, though, and the Wooting 80HE’s magnetic switches are far more versatile for not too much extra cash.
With its fun speckled color scheme, gasket-mounted design and multiple foam layers, the MelGeek Modern97 is a solid value at $139. The linear, pre-lubed Kailh Box Plastic switches in our unit are smooth and enjoyably clacky, while the larger keys are neither hollow nor overly loud. All of the switches are hot-swappable, and the whole thing works over USB-C, Bluetooth or a 2.4GHz dongle. Alas, its ABS keycaps start to feel slicker and greasier with extended use. This model also has a 90 percent layout, which saves a little extra desk space compared to a 96 percent board but can lead to more accidental presses around the arrow keys.
The Razer Huntsman V2 TKL is a quality gaming keyboard with light optical switches, crisp shine-through keycaps, a sturdy frame and an impressively muffled sound thanks to some internal foam. (If you buy the model with Razer’s linear optical switches, that is; another variant with clicky switches isn’t nearly as quiet.) It’s often available in the $100 range, and at that price it’s a solid pick. It’s neither wireless nor hot-swappable, though, and its keys wobble more than those on the Keychron V Max.
The analog Razer Huntsman V3 Pro is a decent alternative to the Wooting 80HE if the latter’s shipping delays become too great. It’s available in a 60 percent, TKL or full-size layout, and it offers a similar set of gaming features, including an adjustable actuation range and a rapid trigger setting for repeating keystrokes faster. But its optical switches are noisier and more hollow-feeling than Wooting’s Hall effect setup, so it’s not as pleasant for typing.
We recommend the SteelSeries Apex Pro TKL Wireless in our guide to the best gaming keyboards, and it remains a good choice if you want the extensive customizability of the Wooting 80HE in a wireless design. It also comes with a wrist rest, unlike Wooting’s keyboard, and it offers an impressive typing experience in its own right. SteelSeries’ configuration software is clunkier to navigate than Wootility, though, and at $270 it’s pricier than Keychron Q Max without having quite as premium a design.
The $45 G.Skill KM250 is the top budget pick in our gaming keyboard guide, and it’s still a better buy than the Keychron C3 Pro is gaming is your chief concern. Compared to Keychron’s board, it adds hot-swappable switches, full RGB backlighting, PBT keycaps and a rotary knob in a smaller 65 percent layout. That said, the C3 Pro’s fuller sound and springier keystrokes make it superior for typing, and its tenkeyless design should be more comfortable for a wider swath of people. It’s typically available for $10 to $15 less, too.
The Logitech G Pro X TKL and 60 percent Logitech G Pro X 60 are well-built but far too expensive for gaming keyboards that lack hot-swappable switches and the analog functionality of competitors like the Wooting 80HE.
The Logitech G Pro X TKL Rapid is better, and a fine magnetic-switch alternative to the Wooting 80HE if you must buy from one of the major keyboard brands. It’s wired-only, but it looks good, with clear RGB lighting, a built-in volume roller, dedicated media keys and a sturdy metal top plate. Its rapid trigger and adjustable actuation features all work fine, and Logitech’s G Hub software is easier to get around than most apps from the big-name manufacturers. All of it costs $30 less than the 80HE as well. Where it falls short is the typing experience: The default switches are pretty noisy, and bottoming out the keys feels stiffer.
The ASUS ROG Strix Scope II 96 Wireless is a wireless 96 percent keyboard that’s marketed toward gamers but should feel great to anyone. The pre-lubed, linear ROG NX Snow switches in our test unit are smooth and quiet, while the PBT keycaps feel stable and high-quality. The keycaps let the RGB backlight shine through cleanly, plus there’s a clever multi-function key that puts various lighting and media controls in one place. ASUS’ Armoury Crate software is sloppy, though, and the board’s overall look may be too gamer-y for some. At $180, it’s not cheap either. The Keychron Q5 Max costs $40 more but gets you a more premium (if heavier) all-aluminum chassis; here, the housing is plastic.
The ASUS ROG Azoth is like a 75 percent version of the Strix Scope II 96 Wireless with a few more enthusiast touches. Its gasket-mounted design gives keystrokes a slightly softer landing, it has a programmable OLED display and it even includes a switch lubing kit in the box. Like the Strix, its hardware is very clearly high-grade. But its software is much more aggravating and, with a list price of $250, it’s a worse value than the Keychron Q Max.
The Corsair K70 RGB TKL isn’t bad in a vacuum, but it lacks wireless functionality and fully hot-swappable switches. It’s on the noisy side, too, and Corsair’s iCue software is rough.
The full-size Corsair K70 Max is another high-end gaming keyboard with magnetic Hall effect sensors and Wooting-style features, but trying to program those settings through Corsair’s iCue app gave us headaches. The 80HE also feels better for typing, with less rattling on large keys like the space bar. Wooting’s HE keyboards support a slightly wider actuation range on top of that, plus they cost $30 to $55 less depending on size.
The Razer Huntsman Mini is a fine value if you want a no-frills 60 percent keyboard for less than $100, but it’s another wired-only model that isn’t truly hot-swappable.
The Logitech G915 TKL is a wireless low-profile model with a metal frame and handy media controls. The GL Tactile switches in our test unit are comfortable and not particularly noisy. But the thin ABS keycaps feel way too cheap for something that costs $180, the keys themselves are a little too wobbly and the switches aren’t hot-swappable. The NuPhy Air75 V2 is a superior value. Logitech released an upgraded model with PBT keycaps and a USB-C port last year; we’ll aim to test that one for our next update, but it’s still pretty expensive at $200.
February 2025: We’ve updated this guide with a new gaming pick, the Wooting 80HE, and ensured the rest of our recommendations are still accurate. We’ve also added a few notes on other keyboards we’ve recently tested. We’ve put several other gaming-oriented models through their paces since our last update: You can find testing notes for those in our dedicated gaming keyboard buying guide.
This article originally appeared on Engadget at https://www.engadget.com/computing/accessories/best-mechanical-keyboard-120050723.html?src=rss
In what has already been a busy past few days for new model releases, OpenAI is capping off the week with a research preview of GPT-4.5. The company is touting the new system as its largest and best model for chat yet. In early testing, OpenAI says people found GPT-4.5 to be a more natural conversationalist, with the ability to convey warmth and display a kind of emotional intelligence.
In one example shared by OpenAI, a person tells ChatGPT they’re going through a hard time after failing a test. Where the company’s previous models, including GPT-4o and o3-mini, might commiserate with the individual before offering a long list of unsolicited advice, GPT-4.5 takes a different tact. “Want to talk about what happened, or do you just need a distraction? I’m here either way,” the chatbot says when powered by GPT-4.5.
The gains shown by GPT-4.5 are the result of advancements OpenAI made in unsupervised learning. With unsupervised learning, a machine learning algorithm is given an unlabeled data set and left to its own devices to find patterns and insights. GPT-4.5 doesn’t “think” like the company’s state-of-the-art reasoning models, but in training the new model OpenAI made architectural enhancements and gave it access to more data and compute power. “The result is a model that has broader knowledge and a deeper understanding of the world, leading to reduced hallucinations,” the company says.
Speaking of reduced hallucinations, OpenAI measured how much better GPT-4.5 in that regard. When put through SimpleQA, an OpenAI-designed benchmark that tests large language models on their ability to answer “straightforward but challenging knowledge questions,” GPT-4.5 beat out o3-mini, GPT-4o and even o1 with a hallucination rate of 37.1 percent. Obviously, the new model doesn’t solve the problem of AI hallucinations altogether, but it is a step in the right direction.
Despite its relative strengths over GPT-4o and o3-mini, GPT-4.5 isn’t a direct replacement for those models. Compared to OpenAI’s reasoning systems, GPT-4.5 is “a more general-purpose, innately smarter model.” Additionally, it’s not natively multimodal like GPT-4o, meaning it doesn’t work with features like Voice Mode, video or screensharing. It’s also “a very large and compute-intensive model.”
It’s best to think of GPT-4.5 as a stepping stone to systems OpenAI plans to offer in the future. In fact, Sam Altman said as much earlier this month when he shared the company’s roadmap, noting GPT-4.5 would be “our last non-chain-of-thought model” — referring to the fact that the new system doesn’t solve problems by tackling them step by step like OpenAI’s reasoning models do. Its successor, GPT-5, will likely integrate many of OpenAI’s latest technologies, including its frontier o3 model. OpenAI reiterated that today, saying it plans to bring GPT-4.5’s “unique strengths, including broader knowledge, stronger intuition, and greater ‘EQ,’ to all users in future models.”
In the meantime, ChatGPT Pro subscribers can begin using GPT-4.5 starting today, with Pro and Team users slated to gain access starting next week.
This article originally appeared on Engadget at https://www.engadget.com/ai/openais-new-gpt-45-model-is-a-better-more-natural-conversationalist-200035185.html?src=rss
I like watching Reels and TikToks about cleaning because in addition to getting some good tips, I find them relatable. Why, yes, Algorithm, I do often find myself in a position where friends are coming over but my home isn’t exactly spotless. How did you know? One Instagram user has a suggestion for how to turn that exact situation into a cleaning win: Called the “GFD bin,” it’s gained some traction on the app as a quick decluttering method worth trying.
A “GFD bin” is a “guests for dinner” bin, according to its creator, Holly Blakey. The organizing and interior decorating guru shared this video last December explaining the idea:
Essentially, before guests come over, you grab a big basket (or even a bag) and take it around the house, tossing anything out of place inside. Then, stash it somewhere, like a closet, committing to putting its contents away the next day. By doing this, you accomplish a few things at once: Obviously, you get your home ready for guests quickly, but you also set yourself up for cleaning success by segmenting the work into two parts.
It might seem like a cop-out to just run around and hide all the dirty parts of your home, but it draws on two techniques I really stand by. The first is the idea of segmentation, like you employ when you follow the “magic basket” approach. The magic basket, for its part, involves going around your home every night and depositing out-of-place items into said basket, then putting everything away the next day. The goal here is to space out your labor so it never gets overwhelming. You wake up the next day feeling good about the work you did do the night before, put everything away, then get motivated by that effort, creating a looping cycle instead of one longer, dread-worthy task.
The second approach the GFD bin calls on is the idea of rewarding yourself to create further cleaning motivation. You need breaks when you do anything productive or you’ll get burned out eventually, but when you’re doing a task that is especially unpleasant or tedious, like cleaning, you should also make sure those breaks are fun and enjoyable. In the same way I’ve recommended eating a favorite candy or watching a favorite show while cleaning, incorporating the arrival of friends as an enjoyable activity mid-cleaning can be motivating, too.
Rather than getting down on yourself for letting a mess pile up and being in a rush before someone gets to your place, think of this as a built-in motivational scheme. There’s no shame in hiding away the mess as long as you follow through on the commitment to putting it away the next day.